What is the FSCG of the NSN 3110-00-060-9480?

The FSCG of the NSN 3110-00-060-9480 is 3110

Does the NSN 3110-00-060-9480 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-060-9480 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-060-9480 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-060-9480 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-060-9480 was assigned to the Federal Catalog?

It was assigned 58 years ago, on Tue, Jun 13, 1967

31863-08-02 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 31863-08-02. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 31863-08-02
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-060-9480
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 06/13/1967

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.5000 inches minimum and 0.5050 inches maximum bore diameter, straight bore shape, 0.0625 inches nominal flange width, contact bearing seal type, 1.2400 inches minimum and 1.2600 inches maximum flange outside diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-060-9480 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 0.5000 inches minimum and 0.5050 inches maximum
Bore Shape: straight
Flange Outside Diameter: 1.2400 inches minimum and 1.2600 inches maximum
Flange Width: 0.0625 inches nominal
Inner Ring Width: 0.4275 inches minimum and 0.4475 inches maximum
Internal Fit-Up Designation: standard
Load Direction: radial
Outer Ring Outside Diameter: 1.1250 inches minimum and 1.1300 inches maximum
Outer Ring Width: 0.3700 inches minimum and 0.3800 inches maximum
Material: plastic polyamide (nylon) retainer
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Retainer Fabrication Method: molded
Seal Quantity: 1
Special Features: one-piece inner or outer ring,one face of both rings flush,inner ring extends on flange side,seal located flange side,bearing finished with a black oxide coating,bearing ground on od only,other surfaces unground
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: 31863-08-02. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-060-9480?: The FSCG of the NSN 3110-00-060-9480 is 3110

Does the NSN 3110-00-060-9480 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-060-9480 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-060-9480 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-060-9480 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.