What is the FSCG of the NSN 3110-00-227-3247?

The FSCG of the NSN 3110-00-227-3247 is 3110

Does the NSN 3110-00-227-3247 have a Schedule B code assigned?

Yes, the Schedule B code is 8482400000

Does NSN 3110-00-227-3247 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-227-3247 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-227-3247 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-227-3247 was assigned to the Federal Catalog?

It was assigned 59 years ago, on Fri, Feb 4, 1966

MS51961-19 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: MS51961-19. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: MS51961-19
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-227-3247
Item Name Code: 00051
Federal Item Identification Guide: A044A0
Assigment Date: 02/04/1966

A single or multiple-row antifriction bearing used with or without inner or outer races characterized by relatively small size rollers usually not ranging above 0.250 inch (6.35mm) diameter and generally longer in length in relation to diameter.

rigid alignment type, 1.3760 inches minimum and 1.3769 inches maximum bore diameter, 1.8745 inches minimum and 1.8750 inches maximum overall outside diameter, 1.2450 inches minimum and 1.2500 inches maximum overall width, steel or copper alloy retainer material

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-227-3247 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: rigid
Bore Diameter: 1.3760 inches minimum and 1.3769 inches maximum
Overall Outside Diameter: 1.8745 inches minimum and 1.8750 inches maximum
Overall Width: 1.2450 inches minimum and 1.2500 inches maximum
Material: steel or copper alloy retainer
Material: steel outer ring
Material: steel roller
Retainer Fabrication Method: pressed
Special Features: oil hole and groove in outer ring als0 mfr standard retainer
Standard Tolerance Designation: afbma std tolerance for industrial needle bearings
Style Designator: non-separable, with roller retainer, hardened and ground
Surface Finish: ground

Replaces

The NSN 3110-00-227-3247 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-780-9349	No Name Available	01/27/1969
3110-00-838-6821	No Name Available	03/01/1968
3110-00-845-0791	No Name Available	10/30/1967

Frequently Asked Questions

Find quick answers to common questions about bearing: MS51961-19. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-227-3247?: The FSCG of the NSN 3110-00-227-3247 is 3110

Does the NSN 3110-00-227-3247 have a Schedule B code assigned?: Yes, the Schedule B code is 8482400000

Does NSN 3110-00-227-3247 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-227-3247 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-227-3247 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.