What is the FSCG of the NSN 3110-00-227-4110?

The FSCG of the NSN 3110-00-227-4110 is 3110

Does the NSN 3110-00-227-4110 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-227-4110 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-227-4110 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-227-4110 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-227-4110 was assigned to the Federal Catalog?

It was assigned 62 years ago, on Tue, Jan 1, 1963

FF-B-171/10J09A2B | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: FF-B-171/10J09A2B. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: FF-B-171/10J09A2B
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-227-4110
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1963

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

straight bore shape, contact bearing seal type, 45.00 millimeters nominal bore diameter, radial load direction, standard internal fit-up designation

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-227-4110 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 45.00 millimeters nominal
Bore Shape: straight
Internal Fit-Up Designation: standard
Load Direction: radial
Lubrication Material: grease
Lubrication Material Document And Classification: dod-g-24508 mil spec single material response
Overall Outside Diameter: 100.00 millimeters nominal
Overall Width: 1.5625 inches nominal
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Special Features: w/o grease plug
Standard Tolerance Designation: abec no.1
Style Designator: non-loading groove, non-separable cartridge type
Surface Finish: ground

Replaces

The NSN 3110-00-227-4110 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-158-8259	No Name Available	04/01/2000
3110-00-568-4071	No Name Available	01/01/1963

Frequently Asked Questions

Find quick answers to common questions about bearing: FF-B-171/10J09A2B. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-227-4110?: The FSCG of the NSN 3110-00-227-4110 is 3110

Does the NSN 3110-00-227-4110 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-227-4110 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-227-4110 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-227-4110 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.