32003 Annular Ball Bearing

Comprehensive specifications and application details for: 32003 Annular Ball Bearing.

Summary

Explore detailed summary information for bearing: 32003. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 32003
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-421-9388
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 02/09/1972

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

1.5000 inches minimum and 1.5005 inches maximum bore diameter, grease lubrication material, standard taper bore shape, radial load direction, contact bearing seal type

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-421-9388 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 1.5000 inches minimum and 1.5005 inches maximum
Bore Shape: standard taper
Load Direction: radial
Lubrication Material: grease
Lubrication Material Document And Classification: dod-g-24508 mil spec single material response
Outer Ring Width: 22.00 millimeters nominal
Overall Outside Diameter: 80.00 millimeters nominal
Overall Width: 1.7188 inches nominal
Material Document And Classification: 66 fed std single material response ball
Material Document And Classification: 66 fed std single material response inner ring
Material Document And Classification: 66 fed std single material response outer ring
Material Document And Classification: 66 fed std single material response retainer
Material: rubber synthetic seal
Material: steel comp e52100 ball
Material: steel comp e52100 inner ring
Material: steel comp e52100 outer ring
Material: steel comp e52100 retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Special Features: no means for relubrication
Style Designator: single row ball, not self-aligning, inner ring extends one side, with eccentric locking collar
Surface Finish: ground

Replaces

The NSN 3110-00-421-9388 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-01-016-7067	No Name Available	01/01/1991

Frequently Asked Questions

Find quick answers to common questions about bearing: 32003. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-421-9388?: The FSCG of the NSN 3110-00-421-9388 is 3110

Does the NSN 3110-00-421-9388 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-421-9388 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-421-9388 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-421-9388 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.