What is the FSCG of the NSN 3110-00-913-4810?

The FSCG of the NSN 3110-00-913-4810 is 3110

Does the NSN 3110-00-913-4810 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-913-4810 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-913-4810 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-913-4810 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-913-4810 was assigned to the Federal Catalog?

It was assigned 65 years ago, on Fri, Jan 1, 1960

202023 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 202023. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 202023
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-913-4810
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1960

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

angular load direction, c4x calibration designator, straight bore shape, 0.0008 inches minimum radial and 0.0011 inches maximum radial internal clearance, 25.0 degrees maximum contact angle

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-913-4810 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Shape: straight
Calibration Designator: c4x
Contact Angle: 25.0 degrees maximum
Internal Clearance: 0.0008 inches minimum radial and 0.0011 inches maximum radial
Load Direction: angular
Material: copper alloy retainer
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Retainer Fabrication Method: pressed
Special Features: faces flush within 0.0001 in. under 3 lb thrust also marked high points of eccentricity in excess of 0.0005 in. also breakout in od of inner ring,one side
Standard Tolerance Designation: abec no.5
Surface Finish: ground

Replaces

The NSN 3110-00-913-4810 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-608-0843	No Name Available	01/07/1970
3110-00-691-2513	No Name Available	03/11/1970

Frequently Asked Questions

Find quick answers to common questions about bearing: 202023. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-913-4810?: The FSCG of the NSN 3110-00-913-4810 is 3110

Does the NSN 3110-00-913-4810 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-913-4810 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-913-4810 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-913-4810 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.