What is the FSCG of the NSN 3110-00-928-2343?

The FSCG of the NSN 3110-00-928-2343 is 3110

Does the NSN 3110-00-928-2343 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-928-2343 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-928-2343 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-928-2343 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-928-2343 was assigned to the Federal Catalog?

It was assigned 58 years ago, on Fri, Aug 26, 1966

SR144SX3T-4DB1C44 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: SR144SX3T-4DB1C44. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: SR144SX3T-4DB1C44
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-928-2343
Item Name Code: 30213
Federal Item Identification Guide: A044A0
Assigment Date: 08/26/1966

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

0.5 pounds minimum and 1.5 pounds maximum bearing preload rating, 14.0 degrees minimum and 19.0 degrees maximum contact angle, angular load direction, 0.1250 inches nominal bore diameter, c calibration designator

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-928-2343 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Preload Rating: 0.5 pounds minimum and 1.5 pounds maximum
Bore Diameter: 0.1250 inches nominal
Calibration Designator: c
Contact Angle: 14.0 degrees minimum and 19.0 degrees maximum
Load Direction: angular
Lubrication Material Document And Classification: mil-l-6085 mil spec single material response
Overall Outside Diameter: 0.2500 inches nominal
Overall Width: 0.1774 inches minimum and 0.1874 inches maximum
Material: unable to decode
Retainer Fabrication Method: pressed
Shield Quantity: 2
Special Features: pair of bearings,duplex mounted unshielded sides. max torque 20.000 mg/mm under 75 gm thrust load w/lubricating oil applied. v mark on of bearing assy
Standard Tolerance Designation: abec no.7
Style Designator: counterbored outer rings, non-separable, back to back mounting
Surface Finish: ground
Lubrication Material: unable to decode

Frequently Asked Questions

Find quick answers to common questions about bearing: SR144SX3T-4DB1C44. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-928-2343?: The FSCG of the NSN 3110-00-928-2343 is 3110

Does the NSN 3110-00-928-2343 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-928-2343 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-928-2343 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-928-2343 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.