What is the FSCG of the NSN 3110-01-127-8082?

The FSCG of the NSN 3110-01-127-8082 is 3110

Does the NSN 3110-01-127-8082 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-127-8082 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-127-8082 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-127-8082 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-127-8082 was assigned to the Federal Catalog?

It was assigned 43 years ago, on Tue, Mar 9, 1982

40763-6 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 40763-6. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 40763-6
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-127-8082
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 03/09/1982

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

straight bore shape, 0.5000 inches nominal bore diameter, 0.0020 inches minimum radial and 0.0080 inches maximum radial internal clearance, snap ring-groove mounting features provided, contact bearing seal type

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-127-8082 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 0.5000 inches nominal
Bore Shape: straight
Features Provided: snap ring-groove mounting
Internal Clearance: 0.0020 inches minimum radial and 0.0080 inches maximum radial
Load Direction: radial
Lubrication Material: grease
Lubrication Material Document And Classification: alvania 3,fscm 54527 mfr ref single material response
Overall Outside Diameter: 35.00 millimeters nominal
Overall Width: 11.00 millimeters nominal
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Special Features: low speed test; 75 percent full of specified lubricant; furnished with 9 balls,0.2100 in. dia; radial clearance must be tested under a 3 lb plus or minis 4 ounce gauge load
Standard Tolerance Designation: abec no.1
Surface Finish: ground

Frequently Asked Questions

Find quick answers to common questions about bearing: 40763-6. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-127-8082?: The FSCG of the NSN 3110-01-127-8082 is 3110

Does the NSN 3110-01-127-8082 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-127-8082 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-127-8082 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-127-8082 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.