What is the FSCG of the NSN 3110-01-181-4128?

The FSCG of the NSN 3110-01-181-4128 is 3110

Does the NSN 3110-01-181-4128 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-181-4128 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-181-4128 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-181-4128 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-181-4128 was assigned to the Federal Catalog?

It was assigned 41 years ago, on Sat, Jun 9, 1984

R3B36C193-2 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: R3B36C193-2. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: R3B36C193-2
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-181-4128
Item Name Code: 30213
Federal Item Identification Guide: A044A0
Assigment Date: 06/09/1984

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

mil-l-6085 mil spec single material response lubrication material document and classification, 0.0017 inches nominal radial internal clearance, g and s section agm65-d end item identification, 0.1873 inches minimum and 0.1874 inches maximum bore diameter, radial load direction

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-181-4128 . Find dimensions, materials, tolerances, performance characteristics, etc.

End Item Identification: g and s section agm65-d
Bore Diameter: 0.1873 inches minimum and 0.1874 inches maximum
Internal Clearance: 0.0017 inches nominal radial
Load Direction: radial
Lubrication Material Document And Classification: mil-l-6085 mil spec single material response
Overall Outside Diameter: 0.4998 inches minimum and 0.5000 inches maximum
Overall Width: 0.3074 inches minimum and 0.3124 inches maximum
Material Document And Classification: unable to decode
Material: unable to decode
Retainer Fabrication Method: machined
Special Features: precaution shall be taken to prevent contamination or separation of matched pairs
Standard Tolerance Designation: abec no. 7p
Style Designator: counterbored outer rings, non-separable, face to face mounting
Surface Finish: ground
Lubrication Material: unable to decode

Frequently Asked Questions

Find quick answers to common questions about bearing: R3B36C193-2. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-181-4128?: The FSCG of the NSN 3110-01-181-4128 is 3110

Does the NSN 3110-01-181-4128 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-181-4128 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-181-4128 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-181-4128 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.