What is the FSCG of the NSN 3110-01-183-4095?

The FSCG of the NSN 3110-01-183-4095 is 3110

Does the NSN 3110-01-183-4095 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-183-4095 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-183-4095 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-183-4095 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-183-4095 was assigned to the Federal Catalog?

It was assigned 40 years ago, on Fri, Jul 6, 1984

3TAR29-36-SU-DB30/40 LYVC-254 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 3TAR29-36-SU-DB30/40 LYVC-254. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 3TAR29-36-SU-DB30/40 LYVC-254
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-183-4095
Item Name Code: 30213
Federal Item Identification Guide: A044A0
Assigment Date: 07/06/1984

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

standard internal fit-up designation, 1.8122 inches minimum and 1.8125 inches maximum bore diameter, 30.0 pounds minimum and 40.0 pounds maximum bearing preload rating, 23.0 degrees nominal contact angle, angular load direction

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-183-4095 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Preload Rating: 30.0 pounds minimum and 40.0 pounds maximum
Bore Diameter: 1.8122 inches minimum and 1.8125 inches maximum
Contact Angle: 23.0 degrees nominal
Internal Fit-Up Designation: standard
Load Direction: angular
Lubrication Material Document And Classification: mis-30520,fscm 58260 mfr ref single material response
Overall Outside Diameter: 2.2497 inches minimum and 2.2500 inches maximum
Overall Width: 0.4900 inches minimum and 0.5100 inches maximum
Material Document And Classification: unable to decode
Material
Material: unable to decode
Retainer Fabrication Method: machined
Special Features: dip and centrifuge in specified lubricant at 200 g's for one minute nominal
Standard Tolerance Designation: abec no. 7t
Style Designator: counterbored outer rings, non-separable, back to back mounting
Surface Finish: ground
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response ball
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response inner ring
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response outer ring
Surface Treatment: passivate ball
Surface Treatment: passivate inner ring
Surface Treatment: passivate outer ring
Lubrication Material: unable to decode

Frequently Asked Questions

Find quick answers to common questions about bearing: 3TAR29-36-SU-DB30/40 LYVC-254. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-183-4095?: The FSCG of the NSN 3110-01-183-4095 is 3110

Does the NSN 3110-01-183-4095 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-183-4095 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-183-4095 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-183-4095 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.