Needle Roller Bearing

114RS214-5

(NSN) National Stock Number

3110-00-455-6188

Federal Supply Classification

3110 Unmounted Antifriction Bearings

Item Name Code

00051

Schedule B Code

8482400000

Summary

3.8150 inches nominal overall width, 3.5305 inches minimum and 3.5317 inches maximum bore diameter, 4.7992 inches minimum and 4.8000 inches maximum overall outside diameter, rigid alignment type, test criticality code justification, steel comp 1010 retainer material

DAC	HCC	DMIL	RNCC
1	-	-	7

RNVC	SADC	MSDS	RNAAC
2	-	-	CT

Identification

A single or multiple-row antifriction bearing used with or without inner or outer races characterized by relatively small size rollers usually not ranging above 0.250 inch (6.35mm) diameter and generally longer in length in relation to diameter.

INC	FIIG	Concept	Condition
00051	A044A0	-	1

Specifications

Overall Width

3.8150 inches nominal

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Bore Diameter

3.5305 inches minimum and 3.5317 inches maximum

Details

The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

Overall Outside Diameter

4.7992 inches minimum and 4.8000 inches maximum

Details

The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

Alignment Type

rigid

Details

Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

Criticality Code Justification

test

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Material

steel comp 1010 retainer

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel inner ring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel roller

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

ams 6490 assn std single material response inner ring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

ams 6490 assn std single material response roller

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

fed-std-66 fed std single material response retainer

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Style Designator

separable rollers, open end, drawn shell

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

51588-aqcvip s2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 60380-atps20a5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
114RS214-5	A0126	5	-	5	2	-	ZR
114RS214-5	06144	5	-	3	2	-	ZZ
ETJ-75649-9D	06144	A	-	5	1	-	ZZ
AP41221	60380	5	-	5	1	-	CT
114RS214-5	51588	5	-	3	2	-	ZZ
ETJ74888-9D10	51588	5	-	5	1	-	CT
ETJ74888-9D11	51588	5	-	5	1	-	CT

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58860	-	P	P

RVC	WCC	TCC	SHC
1	742	Z	9

Certified Supplier

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

ISO9001 / AS9100 Quality Standards
HAZMAT Certified
On Time Delivery
Qualified Sales Team
Counterfeit Parts Prevention
100% Product Inspections

Manufacturer

THE BOEING COMPANY

CAGE: 77272

RIDLEY PARK , PA , 19078-1001

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 3110-00-455-6188

What is the NIIN of the NSN 3110-00-455-6188?

The National Item Identification Number (NIIN) of the NSN 3110-00-455-6188 is 00-455-6188

When the NSN 3110-00-455-6188 was assigned to the Federal Catalog?

It was assigned 55 years ago, on Fri, Apr 18, 1969

Does the NSN 3110-00-455-6188 contain any precious metals?

Does not contain precious metal

Does the NSN 3110-00-455-6188 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.