Duplex Ball Bearing

Y80W1RCRDB

(NSN) National Stock Number

3110-00-598-0796

Federal Supply Classification

3110 Unmounted Antifriction Bearings

Item Name Code

30213

Schedule B Code

8482105068

Summary

1.2300 inches minimum and 1.2350 inches maximum overall width, 4.9990 inches minimum and 5.0000 inches maximum bore diameter, ground surface finish, wire formed retainer fabrication method, angular load direction, steel ball material

DAC	HCC	DMIL	RNCC
3	-	-	E

RNVC	SADC	MSDS	RNAAC
8	-	-	ZZ

Identification

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

INC	FIIG	Concept	Condition
30213	A044A0	-	1

Specifications

Overall Width

1.2300 inches minimum and 1.2350 inches maximum

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Bore Diameter

4.9990 inches minimum and 5.0000 inches maximum

Details

The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

Surface Finish

ground

Details

An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

Retainer Fabrication Method

wire formed

Details

The means used in manufacturing the retainer.

Load Direction

angular

Details

The direction of load with respect to the shaft axis.

Material

steel ball

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel inner ring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel outer ring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel retainer

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

206-010-443-1,97499 mfr ref single material response retainer

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

fed-std-66,aisi/sae e52100 fed std single material response ball

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

fed-std-66,aisi/sae e52100 fed std single material response inner ring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

fed-std-66,aisi/sae e52100 fed std single material response outer ring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Style Designator

counterbored outer rings, non-separable, back to back mounting

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

97499-206-010-443-1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
206-010-443-1	06144	5	-	3	2	-	ZZ
10310201	32828	2	-	E	8	-	CT
11066201	32828	5	-	5	1	-	CT
206-010-443-1	32828	5	-	3	2	-	ZZ
206-010-443-1	83086	5	-	3	2	-	ZZ
Y80PW1D4B	38443	2	-	E	8	-	CT
206-010-420-3	97499	2	-	E	8	-	CT
206-010-443-1	97499	1	-	1	2	-	CT

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58860	-	P	P

RVC	WCC	TCC	SHC
1	742	Z	9

Certified Supplier

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

ISO9001 / AS9100 Quality Standards
HAZMAT Certified
On Time Delivery
Qualified Sales Team
Counterfeit Parts Prevention
100% Product Inspections

Manufacturer

TIMKEN CO DIV THE TIMKEN COMPANY

CAGE: 21335

LEBANON , NH , 03766-2614

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 3110-00-598-0796

What is the NIIN of the NSN 3110-00-598-0796?

The National Item Identification Number (NIIN) of the NSN 3110-00-598-0796 is 00-598-0796

When the NSN 3110-00-598-0796 was assigned to the Federal Catalog?

It was assigned 49 years ago, on Thu, Jan 16, 1975

Does the NSN 3110-00-598-0796 contain any precious metals?

Does not contain precious metal

Does the NSN 3110-00-598-0796 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.