3120-00-014-1318 Sleeve Bearing

Comprehensive specifications and application details for NSN: 3120-00-014-1318.

Summary

Explore detailed summary information for bearing: 3120-00-014-1318. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-00-014-1318
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 10/17/1972

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

square left flange outside right corner corner shape, chamfered inside right corner corner shape, 0.8450 inches minimum and 0.8550 inches maximum body outside diameter, square outside left corner corner shape, relief groove left flange body corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-00-014-1318 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Outside Diameter: 0.8450 inches minimum and 0.8550 inches maximum
Corner Shape: chamfered inside right corner
Corner Shape: relief groove left flange body corner
Corner Shape: square left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square outside right corner
Flange Outside Diameter: 1.4900 inches minimum and 1.5100 inches maximum
Flange Width: 0.1300 inches minimum and 0.1500 inches maximum
Material Document And Classification: mil-s-5000 comp 4340 cond f mil spec single material response overall
Material: steel comp 4340 overall
Special Features: 2 slots in right end surface of flange,0.0250 in. deep,0.0250 in. radius,1 hole 0.0630 in. dia. located 0.6250 in. from centerline,od surface of body plastic coated 0.0400 in. max from right end surface of left flange to 0.0400 in. max from right end surface of body
Surface Finish: 125.0 microinches overall
Surface Treatment Document And Classification: qq-z-325 fed spec single treatment response overall
Surface Treatment: zinc and chromate overall

Related Bearings

Explore the various bearing models associated with this NSN. Click on any bearing below to view detailed technical data, performance ratings, and application guidelines.

Part Number	Name
114RS101-3	Sleeve Bearing

Frequently Asked Questions

Find quick answers to common questions about bearing: 3120-00-014-1318. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-00-014-1318?: The FSCG of the NSN 3120-00-014-1318 is 3120

Does the NSN 3120-00-014-1318 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-00-014-1318 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-014-1318 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-014-1318 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.