HSBG7S13 Self-Aligning Plain Bearing

Comprehensive specifications and application details for: HSBG7S13 Self-Aligning Plain Bearing.

Summary

Explore detailed summary information for bearing: HSBG7S13. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: HSBG7S13
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-00-024-5911
Item Name Code: 13208
Federal Item Identification Guide: A045A0
Assigment Date: 10/19/1972

A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. The assembly may be either separable or nonseparable. Excludes:bearing, plain, rod end and bearing, plain, spherical.

0.4320 inches minimum and 0.4370 inches maximum inner member width, 0.9057 inches minimum and 0.9062 inches maximum outer member outside diameter, grease lubrication material, 0.4370 inches minimum and 0.4375 inches maximum bore diameter, mil-g-23827 mil spec single material response lubrication material document and classification

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-00-024-5911 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 0.4370 inches minimum and 0.4375 inches maximum
Inner Member Width: 0.4320 inches minimum and 0.4370 inches maximum
Material Document And Classification: mil-g-23827 mil spec single material response lubrication
Material: grease lubrication
Outer Member Outside Diameter: 0.9057 inches minimum and 0.9062 inches maximum
Outer Member Width: 0.3380 inches minimum and 0.3480 inches maximum
Special Features: no plating on id surface of inner race member and id and od surfaces of outer race member
Static Radial Load Rating: 16200 pounds
Style Designator: without insert or liner with staking groove
Surface Treatment: cadmium outer race member
Surface Treatment: chromium inner member
Test Data Document: "81349-mil-b-5628 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Replaces

The NSN 3120-00-024-5911 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3120-00-762-5772	No Name Available	11/03/1972

Frequently Asked Questions

Find quick answers to common questions about bearing: HSBG7S13. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-00-024-5911?: The FSCG of the NSN 3120-00-024-5911 is 3120

Does the NSN 3120-00-024-5911 have a Schedule B code assigned?: Yes, the Schedule B code is 8482300040

Does NSN 3120-00-024-5911 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-024-5911 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-024-5911 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.