128CM12223-1 Sleeve Bearing

Comprehensive specifications and application details for: 128CM12223-1 Sleeve Bearing.

Summary

Explore detailed summary information for bearing: 128CM12223-1. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 128CM12223-1
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-00-063-2931
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 01/01/1963

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

chamfered outside right corner corner shape, relief groove left flange body corner corner shape, 1.3765 inches minimum and 1.3775 inches maximum body outside diameter, 1.1130 inches minimum and 1.1150 inches maximum body inside diameter, square left flange outside right corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-00-063-2931 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 1.1130 inches minimum and 1.1150 inches maximum
Body Outside Diameter: 1.3765 inches minimum and 1.3775 inches maximum
Corner Shape: chamfered outside right corner
Corner Shape: relief groove left flange body corner
Corner Shape: square left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Flange Outside Diameter: 1.6870 inches nominal
Flange Width: 0.0910 inches minimum and 0.0930 inches maximum
Lubricant Accommodation Style: grooved double loop
Overall Length: 1.1560 inches nominal
Material Document And Classification: qq-c-465 fed spec single material response overall
Material: copper alloy 642 overall
Style Designator: solid, external flange one end
Surface Finish: 125.0 microinches overall
Test Data Document: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: 128CM12223-1. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-00-063-2931?: The FSCG of the NSN 3120-00-063-2931 is 3120

Does the NSN 3120-00-063-2931 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-00-063-2931 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-063-2931 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-063-2931 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.