24164 Thrust Washer Bearing

Comprehensive specifications and application details for: 24164 Thrust Washer Bearing.

Summary

Explore detailed summary information for bearing: 24164. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 24164
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-00-522-7157
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 08/23/1974

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

square second inside corner corner shape, square first outside corner corner shape, square fourth outside corner corner shape, square first inside corner corner shape, round center hole shape style

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-00-522-7157 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Shape Style: round
Corner Shape: square first inside corner
Corner Shape: square first outside corner
Corner Shape: square fourth outside corner
Corner Shape: square second inside corner
Corner Shape: square second outside corner
Corner Shape: square third outside corner
Cross-Sectional Shape Style: shouldered
Diameter: 0.3750 inches minimum and 0.3760 inches maximum
Flange Thickness: 0.0200 inches minimum and 0.0240 inches maximum
Outside Diameter: 0.5000 inches nominal
Overall Thickness: 0.1150 inches minimum and 0.1200 inches maximum
Material: plastic inner layer
Material: steel comp 630 outer layer
Shank Outside Diameter: 0.4840 inches minimum and 0.4845 inches maximum
Style Designator: round
Surface Finish: 16.0 microinches inside diameter surface of body
Surface Finish: 32.0 microinches largest outside diameter
Surface Finish: 32.0 microinches left side
Surface Finish: 32.0 microinches right side
Surface Finish: 32.0 microinches right side of flange
Surface Finish: 32.0 microinches smallest outside diameter
Surface Treatment: passivate outer layer

Frequently Asked Questions

Find quick answers to common questions about bearing: 24164. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-00-522-7157?: The FSCG of the NSN 3120-00-522-7157 is 3120

Does the NSN 3120-00-522-7157 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-00-522-7157 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-522-7157 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-522-7157 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.