6291630 Sleeve Bearing

Comprehensive specifications and application details for: 6291630 Sleeve Bearing.

Summary

Explore detailed summary information for bearing: 6291630. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 6291630
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-00-629-1630
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 01/01/1963

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

round inside left corner corner shape, round right flange outside left corner corner shape, 5.6250 inches minimum and 5.6260 inches maximum body inside diameter, 6.1270 inches minimum and 6.1280 inches maximum body outside diameter, 4 hole antirotation/lubrication type and quantity

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-00-629-1630 . Find dimensions, materials, tolerances, performance characteristics, etc.

Antirotation/Lubrication Type And Quantity: 4 hole
Body Inside Diameter: 5.6250 inches minimum and 5.6260 inches maximum
Body Outside Diameter: 6.1270 inches minimum and 6.1280 inches maximum
Corner Shape: round right flange outside left corner
Corner Shape: round inside left corner
Corner Shape: round inside right corner
Corner Shape: round left flange outside right corner
Corner Shape: square left flange body corner
Corner Shape: square outside left corner
Corner Shape: square outside right corner
Corner Shape: square right flange body corner
Criticality Code Justification: abhp and adar and adas
Hole Diameter: 0.5000 inches minimum and 0.5160 inches maximum first
Left Flange Outside Diameter: 6.5900 inches minimum and 6.6000 inches maximum
Left Flange Width: 0.2500 inches nominal
Lubricant Accommodation Style: grooved circular and grooved figure 8
Overall Length: 2.4950 inches minimum and 2.5000 inches maximum
Material: copper alloy 934 or copper alloy 910 or copper alloy 670 overall
Right Flange Outside Diameter: 6.5900 inches minimum and 6.6000 inches maximum
Right Flange Width: 0.2430 inches nominal
Style Designator: solid, external flanges both ends
Surface Finish: 125.0 microinches overall
Surface Groove Location And Quantity: 2 external and 2 internal
Surface Treatment: cadmium overall

Frequently Asked Questions

Find quick answers to common questions about bearing: 6291630. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-00-629-1630?: The FSCG of the NSN 3120-00-629-1630 is 3120

Does the NSN 3120-00-629-1630 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-00-629-1630 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-629-1630 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-629-1630 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.