406435 Thrust Washer Bearing

Comprehensive specifications and application details for: 406435 Thrust Washer Bearing.

Summary

Explore detailed summary information for bearing: 406435. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 406435
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-024-7612
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 07/20/1976

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

round center hole shape style, square first inside corner corner shape, square first outside corner corner shape, square second inside corner corner shape, square fourth outside corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-024-7612 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Shape Style: round
Corner Shape: square first inside corner
Corner Shape: square first outside corner
Corner Shape: square fourth outside corner
Corner Shape: square second inside corner
Corner Shape: square second outside corner
Corner Shape: square third outside corner
Cross-Sectional Shape Style: shouldered
Diameter: 0.2100 inches minimum and 0.2150 inches maximum
Flange Thickness: 0.0230 inches minimum and 0.0270 inches maximum
Hardness Rating: 35.0 rockwell c minimum and 45.0 rockwell c maximum overall
Key Length: 0.0110 inches nominal
Key Quantity: 1
Key Radius: 0.0350 inches minimum and 0.0400 inches maximum
Outside Diameter: 0.4300 inches minimum and 0.4360 inches maximum
Overall Thickness: 0.0500 inches minimum and 0.0600 inches maximum
Material: steel overall
Shank Outside Diameter: 0.2500 inches minimum and 0.2540 inches maximum
Style Designator: round w/round keys
Surface Finish: 125.0 microinches largest outside diameter
Surface Finish: 125.0 microinches inside diameter surface of body
Surface Finish: 125.0 microinches smallest outside diameter
Surface Finish: 125.0 microinches right side
Surface Finish: 125.0 microinches right side of flange
Surface Finish: 16.0 microinches left side

Frequently Asked Questions

Find quick answers to common questions about bearing: 406435. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-024-7612?: The FSCG of the NSN 3120-01-024-7612 is 3120

Does the NSN 3120-01-024-7612 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-024-7612 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-024-7612 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-024-7612 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.