SW-0375 Thrust Washer Bearing

Comprehensive specifications and application details for: SW-0375 Thrust Washer Bearing.

Summary

Explore detailed summary information for bearing: SW-0375. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: SW-0375
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-028-6630
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 10/08/1976

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

round center hole shape style, square all corners corner shape, 0.8700 inches minimum and 0.8800 inches maximum outside diameter, rectangular cross-sectional shape style, 0.7600 inches minimum and 0.7700 inches maximum diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-028-6630 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Shape Style: round
Corner Shape: square all corners
Cross-Sectional Shape Style: rectangular
Diameter: 0.7600 inches minimum and 0.7700 inches maximum
Outside Diameter: 0.8700 inches minimum and 0.8800 inches maximum
Overall Thickness: 0.0276 inches minimum and 0.0296 inches maximum
Material: copper alloy and lead alloy intermediate layer
Material: oil lubricating lubrication
Material: plastic polytetrafluoroethylene and lead outer layer
Material: steel inner layer
Style Designator: round
Surface Treatment: copper inner layer

Replaces

The NSN 3120-01-028-6630 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3120-01-058-1190	No Name Available	08/01/1994

Frequently Asked Questions

Find quick answers to common questions about bearing: SW-0375. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-028-6630?: The FSCG of the NSN 3120-01-028-6630 is 3120

Does the NSN 3120-01-028-6630 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-028-6630 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-028-6630 contain precious materials?: Precious metal content is unknown

Does NSN 3120-01-028-6630 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.