123-2010C012 Sleeve Bearing

Comprehensive specifications and application details for: 123-2010C012 Sleeve Bearing.

Summary

Explore detailed summary information for bearing: 123-2010C012. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 123-2010C012
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-043-0085
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 06/19/1977

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

0.8137 inches minimum and 0.8142 inches maximum body outside diameter, square outside left corner corner shape, 0.6255 inches minimum and 0.6265 inches maximum body inside diameter, square inside left corner corner shape, round left flange outside right corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-043-0085 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 0.6255 inches minimum and 0.6265 inches maximum
Body Outside Diameter: 0.8137 inches minimum and 0.8142 inches maximum
Corner Shape: round left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Corner Shape: square outside right corner
Corner Shape: undercut left flange body corner
Flange Outside Diameter: 1.0000 inches nominal
Flange Width: 0.0610 inches minimum and 0.0620 inches maximum
Overall Length: 0.3750 inches minimum and 0.3850 inches maximum
Material Document And Classification: ams 5643 assn std single material response outer layer
Material: plastic polytetrafluoroethylene inner layer
Material: steel comp 630 outer layer
Special Features: plastic liner bonded to left end surface of flange
Specification/Standard Data: 43999-ld131-0028 manufacturers standard
Style Designator: solid, external flange one end
Surface Finish: 32.0 microinches left end surface of body and flange
Surface Finish: 63.0 microinches outside diameter surface of body

Replaces

The NSN 3120-01-043-0085 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3120-00-006-4814	No Name Available	11/01/1980

Frequently Asked Questions

Find quick answers to common questions about bearing: 123-2010C012. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-043-0085?: The FSCG of the NSN 3120-01-043-0085 is 3120

Does the NSN 3120-01-043-0085 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-01-043-0085 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-043-0085 contain precious materials?: Precious metal content is unknown

Does NSN 3120-01-043-0085 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.