414DS120-1 Sleeve Bushing

Comprehensive specifications and application details for: 414DS120-1 Sleeve Bushing.

Summary

Explore detailed summary information for bearing: 414DS120-1. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 414DS120-1
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-100-8413
Item Name Code: 13206
Federal Item Identification Guide: A045A0
Assigment Date: 09/14/1980

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

0.5015 inches minimum and 0.5020 inches maximum body inside diameter, square all corners corner shape, 0.3600 inches minimum and 0.3800 inches maximum overall length, 0.7660 inches minimum and 0.7670 inches maximum body outside diameter, 34.0 rockwell c minimum and 38.0 rockwell c maximum overall hardness rating

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-100-8413 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 0.5015 inches minimum and 0.5020 inches maximum
Body Outside Diameter: 0.7660 inches minimum and 0.7670 inches maximum
Corner Shape: square all corners
Hardness Rating: 34.0 rockwell c minimum and 38.0 rockwell c maximum overall
Overall Length: 0.3600 inches minimum and 0.3800 inches maximum
Material Document And Classification: 77272414ds120-1 mfr ref single material response overall
Material: plastic tetrafluoroethylene outer layer
Material: steel corrosion resisting inner layer
Special Features: liner od of body and right side of flange bonding agent and liner shallnot be affected by mil-h-5606/mil-h-83282 hydraulic fluid
Style Designator: solid, plain, no outside flanges
Surface Finish: 125.0 microinches outside diameter surface of body
Surface Finish: 63.0 microinches inside diameter surface of body
Surface Treatment Document And Classification: 812055751 mfr ref single treatment response intermediate layer
Surface Treatment: passivate intermediate layer
Test Data Document: "81205-bac-5424 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: 414DS120-1. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-100-8413?: The FSCG of the NSN 3120-01-100-8413 is 3120

Does the NSN 3120-01-100-8413 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997060

Does NSN 3120-01-100-8413 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-100-8413 contain precious materials?: Precious metal content is unknown

Does NSN 3120-01-100-8413 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.