3120-01-101-2783 Thrust Washer Bearing

Comprehensive specifications and application details for NSN: 3120-01-101-2783.

Summary

Explore detailed summary information for bearing: 3120-01-101-2783. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-101-2783
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 09/27/1980

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.1266 inches minimum and 0.1366 inches maximum center hole keyway width, 0.0830 inches minimum and 0.0880 inches maximum center hole keyway depth, 0.0312 inches nominal counterbore depth, round w/keyway center hole shape style, square all corners corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-101-2783 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Keyway Depth: 0.0830 inches minimum and 0.0880 inches maximum
Center Hole Keyway Width: 0.1266 inches minimum and 0.1366 inches maximum
Center Hole Shape Style: round w/keyway
Corner Shape: square all corners
Counterbore Depth: 0.0312 inches nominal
Counterbore Diameter: 0.6300 inches minimum and 0.6400 inches maximum
Cross-Sectional Shape Style: counterbored
Diameter: 0.4900 inches minimum and 0.4910 inches maximum
Hardness Rating: 58.0 rockwell c minimum and 61.0 rockwell c maximum overall
Outside Diameter: 0.8750 inches nominal
Overall Thickness: 0.3760 inches nominal
Material Document And Classification: mil-g-23827 mil spec single material response lubrication
Material: grease lubrication
Material: steel overall
Style Designator: round
Surface Condition: lapped

Related Bearings

Explore the various bearing models associated with this NSN. Click on any bearing below to view detailed technical data, performance ratings, and application guidelines.

Part Number	Name
AK 4329 1SZD	Thrust Washer Bearing

Frequently Asked Questions

Find quick answers to common questions about bearing: 3120-01-101-2783. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-101-2783?: The FSCG of the NSN 3120-01-101-2783 is 3120

Does the NSN 3120-01-101-2783 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-101-2783 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-101-2783 contain precious materials?: Precious metal content is unknown

Does NSN 3120-01-101-2783 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.