FBJW32-2YA2252 Sleeve Bushing

Comprehensive specifications and application details for: FBJW32-2YA2252 Sleeve Bushing.

Summary

Explore detailed summary information for bearing: FBJW32-2YA2252. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: FBJW32-2YA2252
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-101-4185
Item Name Code: 13206
Federal Item Identification Guide: A045A0
Assigment Date: 09/29/1980

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

1.1893 inches minimum and 1.1898 inches maximum body outside diameter, square left flange outside right corner corner shape, square outside left corner corner shape, 1.0010 inches minimum and 1.0020 inches maximum body inside diameter, round left flange body corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-101-4185 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 1.0010 inches minimum and 1.0020 inches maximum
Body Outside Diameter: 1.1893 inches minimum and 1.1898 inches maximum
Corner Shape: round left flange body corner
Corner Shape: square left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Corner Shape: square outside right corner
Flange Outside Diameter: 1.5600 inches nominal
Flange Width: 0.0575 inches minimum and 0.0625 inches maximum
Overall Length: 0.7455 inches minimum and 0.7505 inches maximum
Material Document And Classification: 78286sb5204-104 mfr ref single material response inner layer
Material Document And Classification: ams5643 mil std single material response outer layer
Material: plastic tetrafluoroethylene inner layer
Material: steel outer layer
Special Features: operating temp range m65 deg f top300 deg f
Style Designator: solid, external flange one end
Surface Finish: 63.0 microinches outside diameter surface of body
Test Data Document: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: FBJW32-2YA2252. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-101-4185?: The FSCG of the NSN 3120-01-101-4185 is 3120

Does the NSN 3120-01-101-4185 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997060

Does NSN 3120-01-101-4185 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-101-4185 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-101-4185 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.