10107744 Sleeve Bearing

Comprehensive specifications and application details for: 10107744 Sleeve Bearing.

Summary

Explore detailed summary information for bearing: 10107744. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 10107744
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-117-5132
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 08/15/1981

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

0.9540 inches minimum and 0.9550 inches maximum body outside diameter, square outside left corner corner shape, square left flange body corner corner shape, 0.8120 inches minimum and 0.8128 inches maximum body inside diameter, square left flange outside right corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-117-5132 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 0.8120 inches minimum and 0.8128 inches maximum
Body Outside Diameter: 0.9540 inches minimum and 0.9550 inches maximum
Corner Shape: square left flange body corner
Corner Shape: square left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Corner Shape: square outside right corner
Flange Outside Diameter: 1.1450 inches minimum and 1.1500 inches maximum
Flange Width: 0.0500 inches nominal
Hardness Rating: 34.0 rockwell c minimum and 40.0 rockwell c maximum overall
Overall Length: 0.5500 inches nominal
Material: steel comp 4130 overall
Right Internal Flange Hole Diameter: 0.7000 inches nominal
Right Internal Flange Width: 0.0500 inches nominal
Style Designator: solid, external flange one end, internal flange one end
Surface Finish: 125.0 microinches overall
Surface Treatment: oxide overall
Test Data Document: "76301-p.s.23041 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: 10107744. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-117-5132?: The FSCG of the NSN 3120-01-117-5132 is 3120

Does the NSN 3120-01-117-5132 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-01-117-5132 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-117-5132 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-117-5132 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.