3120-01-126-1306 Thrust Washer Bearing

Comprehensive specifications and application details for NSN: 3120-01-126-1306.

Summary

Explore detailed summary information for bearing: 3120-01-126-1306. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-126-1306
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 02/05/1982

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.1220 inches minimum and 0.1250 inches maximum overall thickness, "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)." test data document, 9.1780 inches nominal outside diameter, 7.1530 inches minimum and 7.1580 inches maximum diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-126-1306 . Find dimensions, materials, tolerances, performance characteristics, etc.

Diameter: 7.1530 inches minimum and 7.1580 inches maximum
Outside Diameter: 9.1780 inches nominal
Overall Thickness: 0.1220 inches minimum and 0.1250 inches maximum
Test Data Document: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Related Bearings

Explore the various bearing models associated with this NSN. Click on any bearing below to view detailed technical data, performance ratings, and application guidelines.

Part Number	Name
65391-11626-103	Thrust Washer Bearing
74097	Thrust Washer Bearing

Frequently Asked Questions

Find quick answers to common questions about bearing: 3120-01-126-1306. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-126-1306?: The FSCG of the NSN 3120-01-126-1306 is 3120

Does the NSN 3120-01-126-1306 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-126-1306 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-126-1306 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-126-1306 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.