39-5681-7 Sleeve Bushing

Comprehensive specifications and application details for: 39-5681-7 Sleeve Bushing.

Summary

Explore detailed summary information for bearing: 39-5681-7. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 39-5681-7
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-127-7155
Item Name Code: 13206
Federal Item Identification Guide: A045A0
Assigment Date: 03/06/1982

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

0.5631 inches minimum and 0.5638 inches maximum body outside diameter, 0.6770 inches minimum and 0.6970 inches maximum flange outside diameter, 0.0550 inches minimum and 0.0600 inches maximum flange width, 0.4387 inches minimum and 0.4393 inches maximum body inside diameter, square all corners corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-127-7155 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 0.4387 inches minimum and 0.4393 inches maximum
Body Outside Diameter: 0.5631 inches minimum and 0.5638 inches maximum
Corner Shape: square all corners
Flange Outside Diameter: 0.6770 inches minimum and 0.6970 inches maximum
Flange Width: 0.0550 inches minimum and 0.0600 inches maximum
Overall Length: 0.2850 inches minimum and 0.2900 inches maximum
Material Document And Classification: mil-s-6758 mil spec 1st material response or mil-s-6050 mil spec 2nd material response overall
Material: steel comp 4130 or steel comp 8630 overall
Style Designator: solid, external flange one end
Surface Finish: 100.0 microinches inside diameter surface of body
Surface Finish: 120.0 microinches left end surface of body and flange
Surface Finish: 120.0 microinches outside diameter surface of flange
Surface Finish: 120.0 microinches right end surface of body
Surface Finish: 120.0 microinches right end surface of left flange
Surface Finish: 63.0 microinches outside diameter surface of body
Test Data Document: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Frequently Asked Questions

Find quick answers to common questions about bearing: 39-5681-7. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-127-7155?: The FSCG of the NSN 3120-01-127-7155 is 3120

Does the NSN 3120-01-127-7155 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997060

Does NSN 3120-01-127-7155 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-127-7155 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-127-7155 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.