961D284 Thrust Washer Bearing

Comprehensive specifications and application details for: 961D284 Thrust Washer Bearing.

Summary

Explore detailed summary information for bearing: 961D284. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 961D284
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-169-2991
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 01/06/1984

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.2500 inches minimum and 0.2600 inches maximum diameter, rectangular cross-sectional shape style, 0.4900 inches minimum and 0.5100 inches maximum outside diameter, round center hole shape style, square all corners corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-169-2991 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Shape Style: round
Corner Shape: square all corners
Cross-Sectional Shape Style: rectangular
Diameter: 0.2500 inches minimum and 0.2600 inches maximum
Outside Diameter: 0.4900 inches minimum and 0.5100 inches maximum
Overall Thickness: 0.0595 inches minimum and 0.0645 inches maximum
Material: copper alloy overall
Material: oil lubricating lubrication
Special Test Features: special quality control testing
Style Designator: round
Test Data Document: "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Replaces

The NSN 3120-01-169-2991 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3120-01-044-1289	No Name Available	03/01/2005

Frequently Asked Questions

Find quick answers to common questions about bearing: 961D284. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-169-2991?: The FSCG of the NSN 3120-01-169-2991 is 3120

Does the NSN 3120-01-169-2991 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-169-2991 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-169-2991 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-169-2991 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.