C7505A6-025 Sleeve Bearing

Comprehensive specifications and application details for: C7505A6-025 Sleeve Bearing.

Summary

Explore detailed summary information for bearing: C7505A6-025. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: C7505A6-025
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-265-6191
Item Name Code: 13205
Federal Item Identification Guide: A045A0
Assigment Date: 10/17/1987

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

0.5007 inches minimum and 0.5012 inches maximum body outside diameter, square outside left corner corner shape, square left flange outside right corner corner shape, 0.3755 inches minimum and 0.3765 inches maximum body inside diameter, square inside left corner corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-265-6191 . Find dimensions, materials, tolerances, performance characteristics, etc.

Body Inside Diameter: 0.3755 inches minimum and 0.3765 inches maximum
Body Outside Diameter: 0.5007 inches minimum and 0.5012 inches maximum
Corner Shape: square left flange outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Corner Shape: square outside right corner
Corner Shape: undercut left flange body corner
Flange Outside Diameter: 0.6150 inches minimum and 0.6350 inches maximum
Flange Width: 0.0570 inches minimum and 0.0620 inches maximum
Overall Length: 0.3120 inches nominal
Material Document And Classification: mil-b-81934 mil spec all material responses inner layer
Material Document And Classification: qq-a-225/6 fed spec single material response or qq-a-200/3 fed spec single material response outer layer
Material: aluminum alloy 2024 outer layer
Material: plastic polytetrafluoroethylene and plastic polyamide (nylon) and plastic phenolic inner layer
Specification/Standard Data: 81755-c7505 manufacturers standard
Style Designator: solid, external flange one end
Surface Finish: 63.0 microinches outside diameter surface of body
Surface Treatment Document And Classification: mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response outer layer
Surface Treatment: anodize or chromate outer layer

Frequently Asked Questions

Find quick answers to common questions about bearing: C7505A6-025. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-265-6191?: The FSCG of the NSN 3120-01-265-6191 is 3120

Does the NSN 3120-01-265-6191 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-01-265-6191 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-265-6191 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-265-6191 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.