Sleeve Bearing
301747
(NSN) National Stock Number
3120-00-776-7353
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
2.3600 inches nominal overall length, 2.8165 inches minimum and 2.8175 inches maximum body outside diameter, 2.3500 inches minimum and 2.3600 inches maximum body inside diameter, 3.1800 inches minimum and 3.2000 inches maximum flange outside diameter, 0.1200 inches nominal flange width, grooved closed both ends and grooved circular lubricant accommodation style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
2.3600 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
2.8165 inches minimum and 2.8175 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
2.3500 inches minimum and 2.3600 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
3.1800 inches minimum and 3.2000 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.1200 inches nominal
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Lubricant Accommodation Style
grooved closed both ends and grooved circular
Details
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.Corner Shape
chamfered inside left corner
Details
The physical configuration of the corner.Corner Shape
chamfered outside left corner
Details
The physical configuration of the corner.Corner Shape
chamfered outside right corner
Details
The physical configuration of the corner.Corner Shape
round left flange body corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Hardness Rating
65.0 rockwell f nominal overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Surface Finish
125.0 microinches left end surface of body and flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches right end surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches right end surface of left flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches outside diameter surface of flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches inside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Antirotation/Lubrication Type And Quantity
4 hole and 3 slot
Details
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.Surface Groove Location And Quantity
1 external and 1 internal
Details
Indicates the location and number of grooves on the surface of the item.Special Features
internal groove slanted 12 deg. to longitudinal axis
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
copper alloy 937 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
sae assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 7767353 | 19207 | X | - | 3 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
RENK AMERICA LLC DIV RENK AMERICA
CAGE: 02978
MUSKEGON
, MI
, 49442-1242
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-00-776-7353
What is the NIIN of the NSN 3120-00-776-7353?
The National Item Identification Number (NIIN) of the NSN 3120-00-776-7353 is 00-776-7353
When the NSN 3120-00-776-7353 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Mon, Jan 1, 1962
Does the NSN 3120-00-776-7353 contain any precious metals?
Does not contain precious metal
Does the NSN 3120-00-776-7353 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products