BEARING,SLEEVE
07-382-8E-030-001
(NSN) National Stock Number
3120-01-141-2521
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
0.3520 inches minimum and 0.3670 inches maximum overall length, 0.6260 inches minimum and 0.6265 inches maximum body outside diameter, 0.5005 inches minimum and 0.5015 inches maximum body inside diameter, 0.7400 inches minimum and 0.7600 inches maximum flange outside diameter, 0.0570 inches minimum and 0.0620 inches maximum flange width, square inside left corner corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
0.3520 inches minimum and 0.3670 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.6260 inches minimum and 0.6265 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.5005 inches minimum and 0.5015 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
0.7400 inches minimum and 0.7600 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0570 inches minimum and 0.0620 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
square inside left corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square outside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Corner Shape
undercut left flange body corner
Details
The physical configuration of the corner.Surface Finish
63.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
aluminum alloy 2024 outer layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic polytetrafluoroethylene inner layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic polytetrafluoroethylene left end surface of body and flange
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-b-81934 mil spec single material response inner layer and mil-b-81934/2 mil spec single material response inner layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-b-81934 mil spec single material response left end surface of body and flange and mil-b-81934/2 mil spec single material response left end surface of body and flange
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/6,cond t851 fed spec single material response outer layer or qq-a-200/3,cond t8511 fed spec single material response outer layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize outer layer or chromate outer layer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 mil spec 1st treatment response outer layer or mil-c-5541 mil spec 2nd treatment response outer layer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Specification/Standard Data
81755-c7505 manufacturers standard
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| KDJ08A030-59 | 97613 | 4 | - | 5 | 2 | - | KZ |
| AFGDA8-030 | 50294 | 4 | - | 5 | 2 | - | KZ |
| NH7505A8-030 | 15860 | 4 | - | 3 | 2 | - | KZ |
| FBJW16TH030W | 21335 | 4 | - | 5 | 9 | - | KZ |
| C7505A8-030 | 81755 | A | - | 7 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS
CAGE: 09455
SANTA ANA
, CA
, 92704-5862
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-01-141-2521
When the NSN 3120-01-141-2521 was assigned to the Federal Catalog?
It was assigned 41 years ago, on Tue, Oct 26, 1982
Does the NSN 3120-01-141-2521 contain any precious metals?
Does not contain precious metal
What is the NIIN of the NSN 3120-01-141-2521?
The National Item Identification Number (NIIN) of the NSN 3120-01-141-2521 is 01-141-2521
Does the NSN 3120-01-141-2521 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products