BEARING,PLAIN,SELF-ALIGNING
2006028-101
(NSN) National Stock Number
3120-01-167-3403
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13208
Schedule B Code
8482300040
Summary
0.9995 inches minimum and 1.0000 inches maximum bore diameter, 2.1245 inches minimum and 2.1250 inches maximum outer member outside diameter, 0.8300 inches minimum and 0.8400 inches maximum outer member width, 1.3950 inches minimum and 1.4000 inches maximum inner member width, 25000 pounds static radial load rating, 55.0 rockwell c minimum and 61.0 rockwell c maximum inner member hardness rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | 9F | - | ZZ |
Identification
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. The assembly may be either separable or nonseparable. Excludes:bearing, plain, rod end and bearing, plain, spherical.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13208 | A045A0 | - | 1 |
Specifications
Bore Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Outer Member Outside Diameter
2.1245 inches minimum and 2.1250 inches maximum
Details
None.Outer Member Width
0.8300 inches minimum and 0.8400 inches maximum
Details
None.Inner Member Width
1.3950 inches minimum and 1.4000 inches maximum
Details
None.Static Radial Load Rating
25000 pounds
Details
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.Hardness Rating
55.0 rockwell c minimum and 61.0 rockwell c maximum inner member
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Lubrication Feature
groove inside diameter surface of body
Details
The feature inherent in the item design to effect lubrication.Material
copper alloy 630 internal race insert
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
copper alloy 642 outer race member
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 or steel comp 440c inner member
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 4640 assn std single material response internal race insert
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-7420 mil spec 1st material response or ams 5630 assn std 2nd material response inner member
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-c-465 fed spec single material response outer race member
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
chromium external inner member
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-c-320,cl 2e fed spec single treatment response external inner member
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
without insert or liner with staking groove
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2006028-101 | 97613 | 5 | - | 3 | 2 | - | ZZ |
| KS16-9 | 97613 | 5 | - | 5 | 1 | - | KZ |
| ABS16V-101 | 50294 | 5 | - | 5 | 9 | - | KZ |
| 03-506-16E-003 | 09455 | 5 | - | 5 | 1 | - | KZ |
| 2006028-101 | 09455 | 5 | - | 3 | 2 | - | ZZ |
| 2006028-101 | 15860 | 5 | - | 3 | 2 | - | ZZ |
| ASSB16-27 | 15860 | 5 | - | 5 | 1 | - | KZ |
| 2006028-101 | 17576 | A | - | 7 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58880 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
FAQs
Frequently asked questions for NSN 3120-01-167-3403
When the NSN 3120-01-167-3403 was assigned to the Federal Catalog?
It was assigned 40 years ago, on Thu, Nov 24, 1983
Does the NSN 3120-01-167-3403 contain any precious metals?
Does not contain precious metal
What is the NIIN of the NSN 3120-01-167-3403?
The National Item Identification Number (NIIN) of the NSN 3120-01-167-3403 is 01-167-3403
Does the NSN 3120-01-167-3403 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
2006028-101
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
KS16-9
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
ABS16V-101
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
03-506-16E-003
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
2006028-101
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
2006028-101
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
ASSB16-27
BEARING,PLAIN,SELF-ALIGNING
3120-01-167-3403
2006028-101