BEARING,WASHER,THRUST
TT-504
Rectangular cross-sectional shape style, 0.4900 inches minimum and 0.5100 inches maximum outside diameter, round center hole shape style, 0.2500 inches minimum and 0.2600 inches maximum diameter, 0.0190 inches minimum and 0.0200 inches maximum overall thickness, lubricating oil lubrication material
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | KZ |
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13211 | A045A0 | - | 1 |
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Details
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Details
The element compound or mixture with which the item is lubricated. please use mrc lbma as a replacement for canceled mrc.Details
The physical configuration of the corner.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Details
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 922F776 ITEM 11 | 94259 | A | - | 3 | 1 | - | KZ |
| RO0141 | 13873 | A | - | 5 | 2 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
When the NSN 3120-01-169-2993 was assigned to the Federal Catalog?
Does the NSN 3120-01-169-2993 contain any precious metals?
What is the NIIN of the NSN 3120-01-169-2993?
Does the NSN 3120-01-169-2993 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.