D4232 ITEM-176-TB-520

Especificaciones completas y detalles de aplicación para: D4232 ITEM-176-TB-520 Sleeve Bushing.

Resumen

Explore información resumida detallada para el rodamiento: D4232 ITEM-176-TB-520. Incluye NSN, grupo de clasificación y códigos de identificación para apoyar la contratación, el cumplimiento y el seguimiento preciso de partes.

Número de Parte
D4232 ITEM-176-TB-520
Clasificación Federal de Suministros
3120 Cojinetes lisos desmontados
(NSN) Número de Inventario Nacional
3120-01-528-8501
Código de nombre del artículo
13206
Guía Federal de Identificación de Artículos
A045A0
Fecha de asignación
03/28/2005

Un artículo sin rosca de forma tubular con o sin brida en un extremo diseñado para insertarse en un orificio para reducir el diámetro interior del orificio y proteger la estructura del cuerpo circundante de daños resultantes de tensión, tensión y / o vibración. La longitud total debe exceder el 25 por ciento del diámetro exterior o la distancia más corta entre los planos periféricos del cuerpo. Incluye elementos que se dividen en dos o más segmentos, lo que incluye 180 grados (3,141 radianes) o menos de la periferia del rumbo. Para artículos hechos de caucho, consulte casquillo, no metálico. Véase también rodamiento, manguito; casquillo, cónico; espaciador, manguito; aislante, casquillo; y buje, conductor eléctrico. Excluye: casquillo, taladro, plantilla.

steel overall material, hydraulic teststand htb-50e end item identification, 3.8750 inches minimum and 4.0000 inches maximum body outside diameter, 0.6250 inches nominal flange width, 2.8750 inches nominal overall length

Ficha de datos

A continuación se presentan las especificaciones técnicas completas para el rodamiento: 3120-01-528-8501 . Encontrar dimensiones, materiales, tolerancias, características de rendimiento, etc.

Identificación del artículo final
hydraulic teststand htb-50e
Diámetro exterior del cuerpo
3.8750 inches minimum and 4.0000 inches maximum
Ancho de brida
0.6250 inches nominal
Longitud total
2.8750 inches nominal
Material
steel overall
Nombre de la pieza asignado por la agencia de control
v belt sheave bushing(motor); split taper bushings
Características especiales
"outside flange diameter is 5" and some fraction which is not determinable with the tech data in possesion; the outside diameter is tapered where the small end in 3.8750" and the large end is 4.0000"; there is a keyway in the bushing; and three cap screw holes; and two other holes all around the flange portion; the bore range is 1.125"- approximately 2.75" but is a bit unreadable on the tech data"
Designador de estilo
split, external flange one end, internal flange one end

Preguntas frecuentes

Encontrar respuestas rápidas a preguntas comunes sobre el rodamiento: D4232 ITEM-176-TB-520. Explore las especificaciones técnicas, consejos de instalación, guías de mantenimiento, requisitos regulatorios y consejos de solución de problemas.

What is the FSCG of the NSN 3120-01-528-8501?
The FSCG of the NSN 3120-01-528-8501 is 3120
Does the NSN 3120-01-528-8501 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997060
Does NSN 3120-01-528-8501 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-528-8501 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-528-8501 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-528-8501 was assigned to the Federal Catalog?
It was assigned hace 20 años, on Mon, Mar 28, 2005

Precio & Disponibilidad

Rellene el formulario para obtener precios y detalles de disponibilidad para el rodamiento: D4232 ITEM-176-TB-520

Rodamientos Populares

Consulte nuestra selección de rodamientos de alta demanda y alto rendimiento:

207HDM 011
3110-00-151-4822
Duplex Ball Bearing
207J24ITEM1A1
3110-00-555-5424
Annular Ball Bearing
207J24ITEM1A2
3110-00-540-4659
Annular Ball Bearing
207J24ITEM2A1
3110-00-100-5998
Tapered Roller Bearing
207J24ITEM2A2
3110-00-100-5580
Tapered Roller Bearing
207J24ITEM4A1
3110-00-437-4151
Tapered Roller Bearing
207J24ITEM4A2
3110-00-437-4151
Tapered Roller Bearing
207K
3110-00-516-5490
Annular Ball Bearing
207KC4
3110-00-516-5490
Annular Ball Bearing
207KDD
3110-00-144-8648
Annular Ball Bearing
207KDDANG25
3110-00-554-5411
Annular Ball Bearing
207KDDFS102
3110-00-554-5411
Annular Ball Bearing
207KDDFS160
3110-00-554-5411
Annular Ball Bearing
207KDDFS160A
3110-00-554-5411
Annular Ball Bearing
207KDDFS381
3110-00-554-3282
Annular Ball Bearing