KDJ20A014-342

מפרט מקיף ופרטי יישומים עבור: KDJ20A014-342 Sleeve Bearing.

תַקצִיר

עיין במידע סיכום מפורט עבור מיסבים: KDJ20A014-342. כולל NSN, קבוצת סיווג וקודי זיהוי לתמיכה במקורות מידע, תאימות ומעקב מדויק אחר חלקים.

מספר חלק
KDJ20A014-342
סיווג אספקה פדרלי
3120 מיסבים רגילים לא מורכבים
מספר מלאי לאומי (NSN)
3120-01-029-7012
שם פריט קוד
13205
מדריך זיהוי פריטים פדרלי
A045A0
תאריך ההקצאה
10/21/1976

פריט בצורת צינור עם או בלי אוגן/ים, שנועד להפחית חיכוך ולשאת עומס קינטי על המשטח/ים המקביל/ים לציר הקדח. עליו להיות בעל אמצעי סיכה גלויים או ניתנים לזיהוי או להיות משומן/ת מעצמו. האורך הכולל חייב לעלות על 25 אחוז מהקוטר החיצוני או המרחק הקצר ביותר בין השטוחים ההיקפיים של הגוף, למעט פריטים צינוריים ישרים (ללא אוגן או כתף) בעלי משטח/י מיסב מקביל/ים לציר הקדח בלבד. כולל פריטים המחולקים לשני מקטעים או יותר הכוללים 180 מעלות (3.141 רדיאנים) או פחות מהיקף המיסב. ראה גם תותב, שרוול; מרווח, שרוול; ודיסקית (כפי ששונה). לא כולל: פין, חלול.

1.2505 inches minimum and 1.2515 inches maximum body inside diameter, 1.4393 inches minimum and 1.4403 inches maximum body outside diameter, square left flange outside right corner corner shape, square outside left corner corner shape, square inside left corner corner shape

גיליון נתונים

להלן המפרט הטכני המקיף עבור מיסבים: 3120-01-029-7012 . מצא מידות, חומרים, סבולות, מאפייני ביצועים וכו'.

קוטר פנימי של הגוף
1.2505 inches minimum and 1.2515 inches maximum
קוטר חיצוני של הגוף
1.4393 inches minimum and 1.4403 inches maximum
צורת פינה
square left flange outside right corner
צורת פינה
square outside left corner
צורת פינה
square inside left corner
צורת פינה
square inside right corner
צורת פינה
square outside right corner
צורת פינה
undercut left flange body corner
קוטר חיצוני של אוגן
1.9800 inches minimum and 2.0000 inches maximum
רוחב אוגן
0.0887 inches minimum and 0.0937 inches maximum
אורך כולל
0.5162 inches minimum and 0.5312 inches maximum
מסמך חומרי וסיווג
qq-a-200/3,t8511 fed spec single material response or qq-a-225/6,t851 fed spec single material response outer layer
חוֹמֶר
aluminum alloy 2024 outer layer
חוֹמֶר
plastic polytetrafluoroethylene inner layer
תכונות מיוחדות
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
סמל סגנון
solid, external flange one end
גימור פני השטח
125.0 microinches inside diameter surface of body
גימור פני השטח
125.0 microinches outside diameter surface of flange
גימור פני השטח
125.0 microinches right end surface of body
גימור פני השטח
125.0 microinches right end surface of left flange
גימור פני השטח
15.0 microinches left end surface of body and flange
גימור פני השטח
63.0 microinches outside diameter surface of body
מסמך וסיווג טיפול פני השטח
mil-a-8625 mil spec single treatment response outer layer
טיפול פני השטח
anodize outer layer

מחליף

The NSN 3120-01-029-7012 is used in place of the following discontinued or alternate items:

NSN שֵׁם תַאֲרִיך
3120-00-275-3151 No Name Available 01/01/1979
3120-01-180-2580 No Name Available 08/01/1986

שאלות נפוצות

מצא תשובות מהירות לשאלות נפוצות בנוגע למיסבים: KDJ20A014-342. גלה מפרטים טכניים, טיפים להתקנה, הנחיות תחזוקה, דרישות רגולטוריות ועצות לפתרון בעיות.

What is the FSCG of the NSN 3120-01-029-7012?
The FSCG of the NSN 3120-01-029-7012 is 3120
Does the NSN 3120-01-029-7012 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-029-7012 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-029-7012 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-029-7012 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-029-7012 was assigned to the Federal Catalog?
It was assigned לפני 48 שנים, on Thu, Oct 21, 1976

מחיר וזמינות

מלאו את הטופס כדי לקבל פרטי תמחור וזמינות עבור המיסב: KDJ20A014-342

מיסבים פופולריים

עיינו במבחר המיסבים המבוקשים והביצועים הגבוהים שלנו:

G3120011211791
3120-01-419-0978
Sleeve Bushing
G3120011212811
3120-01-419-0801
Sleeve Bushing
G3120011215603
3120-01-419-1253
Sleeve Bushing
G3120011218579
3120-01-420-3088
Sleeve Bushing
G3120011231456
3120-01-419-1547
Sleeve Bushing
G3120011767423
3120-01-451-2063
Sleeve Bushing
G316753-1
3120-01-279-9157
Sleeve Bushing
G3168
3120-00-383-3833
Sleeve Bearing
G317
3110-00-144-8932
Annular Ball Bearing
G317-2
3120-01-242-2758
Sleeve Bushing
G319-18
3110-00-100-6159
Bearing Ball
G319-4
3110-00-100-6147
Bearing Ball
G319-6
3110-00-100-6149
Bearing Ball
G32-12P
3120-01-381-2286
Sleeve Bushing
G32-31
3120-01-046-1121
Sleeve Bushing