3120-01-224-4683 Rod End Plain Bearing

מפרטים מקיפים ופרטי יישום עבור NSN: 3120-01-224-4683.

תַקצִיר

עיין במידע סיכום מפורט עבור מיסבים: 3120-01-224-4683. כולל NSN, קבוצת סיווג וקודי זיהוי לתמיכה במקורות מידע, תאימות ומעקב מדויק אחר חלקים.

סיווג אספקה פדרלי
3120 מיסבים רגילים לא מורכבים
מספר מלאי לאומי (NSN)
3120-01-224-4683
שם פריט קוד
13209
מדריך זיהוי פריטים פדרלי
A045A0
תאריך ההקצאה
01/16/1986

מכלול נשלף שבתוך או עליו נעים ציר, גלגלת, ציר או דומים. הוא משמש לנשיאת עומס ולהפחתת חיכוך הזזה. הוא אינו משתמש באלמנטים מתגלגלים. האיבר החיצוני של המכלול שונה כדי לספק קנה. האיבר הפנימי יכול להיות מיסב כדורי רגיל או מיסב שרוול. לא כולל: מיסב, רגיל, כדורי ומיסב, רגיל, בעל יישור עצמי.

0.6245 inches minimum and 0.6250 inches maximum bore diameter, 0.7480 inches minimum and 0.7500 inches maximum inner member width, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 3.0300 inches nominal bore center to shank end distance, 28.0 rockwell c minimum and 37.0 rockwell c maximum rod end body hardness rating

גיליון נתונים

להלן המפרט הטכני המקיף עבור מיסבים: 3120-01-224-4683 . מצא מידות, חומרים, סבולות, מאפייני ביצועים וכו'.

קוטר קדח
0.6245 inches minimum and 0.6250 inches maximum
מרחק מרכז קדח לקצה שוק
3.0300 inches nominal
דירוג קשיות
55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
דירוג קשיות
28.0 rockwell c minimum and 37.0 rockwell c maximum rod end body
רוחב חבר פנימי
0.7480 inches minimum and 0.7500 inches maximum
תכונת שימון
self-lubricating liner race liner
אורך כולל
3.7800 inches nominal
מסמך חומרי וסיווג
ams 5630 assn std single material response inner member
מסמך חומרי וסיווג
ams 5643 assn std 1st material response and ams 5659 assn std 2nd material response rod end body
חוֹמֶר
plastic polytetrafluoroethylene race liner
חוֹמֶר
steel comp 440c inner member
חוֹמֶר
steel comp 630 or steel comp xm-12 rod end body
קוטר חיצוני של החבר החיצוני
1.5000 inches nominal
רוחב חבר חיצוני
0.5620 inches minimum and 0.5720 inches maximum
אורך מקצה השוק עד הכתף
1.4100 inches nominal
סגנון שאנק
externally threaded
אורך חוט שוק
1.0000 inches nominal
תכונות מיוחדות
passivation of inner member optional; no paint on housing bore or knurled and threaded portions of body; od of rod end body knurled over threads 0.875 in. to 1.000 in. from rod end
דירוג עומס רדיאלי סטטי
29000 pounds
סמל סגנון
shouldered ball type
מסמך וסיווג טיפול פני השטח
mil-c-83286 mil spec single treatment response rod end body
מסמך וסיווג טיפול פני השטח
mil-s-5002 mil spec single treatment response inner member
טיפול פני השטח
passivate inner member
טיפול פני השטח
plastic polyurethane rod end body
מסמך נתוני בדיקה
"81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
מחלקת חוטים
3a
קוטר הברגה
0.6250 inches nominal
כיוון החוט
right-hand
כמות חוט לאינץ'
18
סמן סדרת חוט
unjf

מיסבים קשורים

חקור את דגמי המיסבים השונים הקשורים ל-NSN זה. לחץ על כל מיסב למטה כדי להציג נתונים טכניים מפורטים, דירוגי ביצועים והנחיות יישום.

מספר חלק שֵׁם
8602-1 Rod End Plain Bearing

שאלות נפוצות

מצא תשובות מהירות לשאלות נפוצות בנוגע למיסבים: 3120-01-224-4683. גלה מפרטים טכניים, טיפים להתקנה, הנחיות תחזוקה, דרישות רגולטוריות ועצות לפתרון בעיות.

What is the FSCG of the NSN 3120-01-224-4683?
The FSCG of the NSN 3120-01-224-4683 is 3120
Does the NSN 3120-01-224-4683 have a Schedule B code assigned?
Yes, the Schedule B code is 8483308055
Does NSN 3120-01-224-4683 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-224-4683 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-224-4683 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-224-4683 was assigned to the Federal Catalog?
It was assigned לפני 40 שנים, on Thu, Jan 16, 1986

מחיר וזמינות

מלאו את הטופס כדי לקבל פרטי תמחור וזמינות עבור המיסב: 3120-01-224-4683

מיסבים פופולריים

עיינו במבחר המיסבים המבוקשים והביצועים הגבוהים שלנו:

D15-753JPC126-128-139-140
3120-00-148-1923
Sleeve Bearing
D15-762FPC124T0126-128
3110-00-148-1922
Shell Bearing
D15-762FPC126-128-139-140
3120-00-148-1923
Sleeve Bearing
D15-762IPC124T0126-128
3110-00-148-1922
Shell Bearing
D15-762IPC126-128-139-140
3120-00-148-1923
Sleeve Bearing
D15-762JPC124T0126-128
3110-00-148-1922
Shell Bearing
D15-762JPC126-128-139-140
3120-00-148-1923
Sleeve Bearing
D15-765BPC532-533-537
3120-00-216-9357
Bearing Assembly
D15-765BPC804
3120-00-343-9716
Sleeve Bushing
D15-765EPC532-533-537
3120-00-216-9357
Bearing Assembly
D15-765KPC804
3120-00-343-9716
Sleeve Bushing
D15-765LPC532-533-537
3120-00-216-9357
Bearing Assembly
D15-765LPC804
3120-00-343-9716
Sleeve Bushing
D15-765MPC532-533-537
3120-00-216-9357
Bearing Assembly
D15-765MPC804
3120-00-343-9716
Sleeve Bushing