NEG6-26MD Self-Aligning Plain Bearing

מפרט מקיף ופרטי יישומים עבור: NEG6-26MD Self-Aligning Plain Bearing.

תַקצִיר

עיין במידע סיכום מפורט עבור מיסבים: NEG6-26MD. כולל NSN, קבוצת סיווג וקודי זיהוי לתמיכה במקורות מידע, תאימות ומעקב מדויק אחר חלקים.

מספר חלק
NEG6-26MD
סיווג אספקה פדרלי
3120 מיסבים רגילים לא מורכבים
מספר מלאי לאומי (NSN)
3120-01-477-2565
שם פריט קוד
13208
מדריך זיהוי פריטים פדרלי
A045A0
תאריך ההקצאה
08/03/2000

מכלול ניתן להפרדה שבתוכה או עליו נעים גלגלת, ציר, מוט או דומים. הוא משמש לנשיאת עומס ולהפחתת חיכוך החלקה. הוא אינו משתמש באלמנטים מתגלגלים. הפריט מורכב מכדור מדויק מושחז (או מיסב כדורי חלק) שסביבו מותקנת טבעת חיצונית. המכלול יכול להיות ניתן להפרדה או בלתי ניתן להפרדה. לא כולל: מיסב, חלק, קצה מוט ומיסב, חלק, כדורי.

33.0 rockwell c minimum and 60.0 rockwell c maximum outer race member hardness rating, 0.3745 inches minimum and 0.3750 inches maximum bore diameter, used on f-18 e/f end item identification, 0.8110 inches minimum and 0.8130 inches maximum inner member width, 33.0 rockwell c minimum and 60.0 rockwell c maximum inner member hardness rating

גיליון נתונים

להלן המפרט הטכני המקיף עבור מיסבים: 3120-01-477-2565 . מצא מידות, חומרים, סבולות, מאפייני ביצועים וכו'.

קוטר קדח
0.3745 inches minimum and 0.3750 inches maximum
זיהוי פריט סופי
used on f-18 e/f
דירוג קשיות
33.0 rockwell c minimum and 60.0 rockwell c maximum inner member
דירוג קשיות
33.0 rockwell c minimum and 60.0 rockwell c maximum outer race member
רוחב חבר פנימי
0.8110 inches minimum and 0.8130 inches maximum
מסמך חומרי וסיווג
ams 5630 assn std single material response inner member
מסמך חומרי וסיווג
ams 5643 assn std single material response outer race member
חוֹמֶר
plastic phenolic race liner
חוֹמֶר
steel comp 440c inner member
חוֹמֶר
steel comp 630 outer race member
קוטר חיצוני של החבר החיצוני
0.9055 inches minimum and 0.9060 inches maximum
רוחב חבר חיצוני
0.3400 inches minimum and 0.3450 inches maximum
דירוג עומס רדיאלי סטטי
13500 pounds
סמל סגנון
with insert and/or liner with staking groove
מסמך נתוני בדיקה
"81349-mil-b-81820 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

שאלות נפוצות

מצא תשובות מהירות לשאלות נפוצות בנוגע למיסבים: NEG6-26MD. גלה מפרטים טכניים, טיפים להתקנה, הנחיות תחזוקה, דרישות רגולטוריות ועצות לפתרון בעיות.

What is the FSCG of the NSN 3120-01-477-2565?
The FSCG of the NSN 3120-01-477-2565 is 3120
Does the NSN 3120-01-477-2565 have a Schedule B code assigned?
Yes, the Schedule B code is 8482300040
Does NSN 3120-01-477-2565 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-477-2565 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-477-2565 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-477-2565 was assigned to the Federal Catalog?
It was assigned לפני 26 שנים, on Thu, Aug 3, 2000

מחיר וזמינות

מלאו את הטופס כדי לקבל פרטי תמחור וזמינות עבור המיסב: NEG6-26MD

מיסבים פופולריים

עיינו במבחר המיסבים המבוקשים והביצועים הגבוהים שלנו:

S9099-4G33
3120-01-227-8511
Thrust Washer Bearing
S9099-4G35
3120-01-227-8518
Thrust Washer Bearing
S9099-4G36
3120-01-227-8517
Thrust Washer Bearing
S9099-4G37
3120-01-227-8516
Thrust Washer Bearing
S9099-4G38
3120-01-227-8515
Thrust Washer Bearing
S9099-4G39
3120-01-227-8514
Thrust Washer Bearing
S9099-4G9
3120-01-236-8001
Thrust Washer Bearing
S9150APC116
3120-00-099-8854
Linear-Rotary Motion Roller
S9167-BW-MMA-010 TABLE 7-7 IT 5
3120-01-722-5179
Linear-Rotary Motion Roller
S9167-BW-MMA-010 TABLE 7-7 IT8
3120-01-721-8512
Sleeve Bearing
S92
3110-00-100-0208
Tapered Roller Cone and Rollers
S9233-DS-MMC-010 7-45-13
3120-01-606-0651
Sleeve Bearing
S9233-XX-MMA-010/LCS S7-150 #102
3120-01-547-5803
Sleeve Bushing
S9233-XX-MMA-010/LCS SH7-156 #2
3120-01-547-5902
Sleeve Bushing
S9233-XX-MMA-010/LCS SH7-35 #23
3130-01-547-4450
Bearing Unit Housing