77284 Rod End Plain Bearing
包括的な仕様とアプリケーションの詳細: 77284 Rod End Plain Bearing.
まとめ
ベアリングの詳細な概要情報を確認します。 77284. 調達、コンプライアンス、正確な部品追跡をサポートするための NSN、分類グループ、識別コードが含まれています。
- 部品番号
- 77284
- 連邦供給分類
- 3120 非マウント滑り軸受
- (NSN) 国立ストック番号
- 3120-00-781-4737
- 商品名コード
- 13209
- 連邦物品識別ガイド
- A045A0
- 割り当て日
- 01/01/1960
ジャーナル、ガジョン、ピボットなどが内部または表面で移動する、取り外し可能なアセンブリです。荷重を支え、滑り摩擦を低減するために使用されます。転動体は使用しません。アセンブリの外側の部材は、シャンクとなるように改造されています。内側の部材は、滑り球面軸受またはスリーブ軸受のいずれかです。ただし、滑り球面軸受および滑り自動調心軸受は除きます。
23.0 rockwell c minimum and 35.0 rockwell c maximum race insert hardness rating, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 2.3020 inches minimum and 2.3220 inches maximum bore center to shank end distance, 0.3745 inches minimum and 0.3750 inches maximum bore diameter
データシート
以下はベアリングの包括的な技術仕様です。 3120-00-781-4737 . 寸法、材質、許容差、性能特性などを調べます。
- ボア径
- 0.3745 inches minimum and 0.3750 inches maximum
- ボア中心からシャンク端までの距離
- 2.3020 inches minimum and 2.3220 inches maximum
- 硬度評価
- 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 硬度評価
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 硬度評価
- 23.0 rockwell c minimum and 35.0 rockwell c maximum race insert
- 内側部材幅
- 0.4950 inches minimum and 0.5000 inches maximum
- 全長
- 2.8595 inches minimum and 2.8895 inches maximum
- 材料
- plastic polytetrafluoroethylene race liner
- 材料
- steel comp 440c inner member
- 材料
- steel comp 630 race insert
- 材料
- steel comp 630 rod end body
- 外側部材外径
- 1.1150 inches minimum and 1.1350 inches maximum
- 外側部材幅
- 0.3700 inches minimum and 0.3800 inches maximum
- シャンクねじ長さ
- 1.3440 inches minimum and 1.4380 inches maximum
- シャンクスタイル
- externally threaded
- 特集
- keyway in shank
- 静的ラジアル荷重定格
- 10140 pounds
- スタイル指定子
- ball type
- 表面処理
- chromium inner member
- テストデータドキュメント
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- スレッドクラス
- 3a
- ねじ径
- 0.438 inches nominal
- ねじ方向
- right-hand
- インチあたりのねじ山数
- 20
- ねじシリーズ指定子
- unf
置き換え
The NSN 3120-00-781-4737 is used in place of the following discontinued or alternate items:
| NSN | 名前 | 日付 |
|---|---|---|
| 3120-00-412-3454 | No Name Available | 06/01/2007 |
| 3120-00-870-0158 | No Name Available | 11/01/1989 |
| 3120-00-876-8796 | No Name Available | 12/19/1973 |
よくある質問
ベアリングに関するよくある質問への簡単な回答を見つけてください。 77284. 技術仕様、インストールのヒント、メンテナンスのガイドライン、規制要件、トラブルシューティングのアドバイスを確認します。
- What is the FSCG of the NSN 3120-00-781-4737?
- The FSCG of the NSN 3120-00-781-4737 is 3120
- Does the NSN 3120-00-781-4737 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-781-4737 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-781-4737 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-781-4737 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-781-4737 was assigned to the Federal Catalog?
- It was assigned 66年前, on Fri, Jan 1, 1960
価格と在庫状況
ベアリングの価格と在庫状況の詳細を取得するには、フォームに記入してください。 77284
在庫状況
この製品は次の数量と条件で入手可能です。
| 新たな余剰 | 5 |
| 削除されたまま | 1 |
| 新素材 | 2 |
| 合計 | 8 |
この商品の在庫状況は最後に次の日に更新されました:
05/25/2026 08:05 PM EDT.
それ以降、在庫状況が変更になっている可能性があります。最新の価格と在庫状況については、お見積もりをご依頼ください。