3120-01-030-3383 Rod End Plain Bearing
NSNの包括的な仕様とアプリケーションの詳細: 3120-01-030-3383.
まとめ
ベアリングの詳細な概要情報を確認します。 3120-01-030-3383. 調達、コンプライアンス、正確な部品追跡をサポートするための NSN、分類グループ、識別コードが含まれています。
- 連邦供給分類
- 3120 非マウント滑り軸受
- (NSN) 国立ストック番号
- 3120-01-030-3383
- 商品名コード
- 13209
- 連邦物品識別ガイド
- A045A0
- 割り当て日
- 11/03/1976
ジャーナル、ガジョン、ピボットなどが内部または表面で移動する、取り外し可能なアセンブリです。荷重を支え、滑り摩擦を低減するために使用されます。転動体は使用しません。アセンブリの外側の部材は、シャンクとなるように改造されています。内側の部材は、滑り球面軸受またはスリーブ軸受のいずれかです。ただし、滑り球面軸受および滑り自動調心軸受は除きます。
0.9350 inches minimum and 0.9370 inches maximum inner member width, 35.5 rockwell c minimum and 41.5 rockwell c maximum internal rod end body hardness rating, 3.3020 inches minimum and 3.3220 inches maximum bore center to shank end distance, 204-076-428-3,97499 mfr ref single material response race liner material document and classification, 0.4995 inches minimum and 0.5000 inches maximum bore diameter
データシート
以下はベアリングの包括的な技術仕様です。 3120-01-030-3383 . 寸法、材質、許容差、性能特性などを調べます。
- ボア径
- 0.4995 inches minimum and 0.5000 inches maximum
- ボア中心からシャンク端までの距離
- 3.3020 inches minimum and 3.3220 inches maximum
- 硬度評価
- 35.5 rockwell c minimum and 41.5 rockwell c maximum internal rod end body
- 内側部材幅
- 0.9350 inches minimum and 0.9370 inches maximum
- マテリアルドキュメントと分類
- 204-076-428-3,97499 mfr ref single material response race liner
- 全長
- 4.1970 inches minimum and 4.2270 inches maximum
- マテリアルドキュメントと分類
- ams5643 assn std single material response internal rod end body
- マテリアルドキュメントと分類
- ams5614 assn std single material response race insert
- マテリアルドキュメントと分類
- qq-s-763 fed spec single material response inner member
- 材料
- plastic tetrafluoroethylene race liner
- 材料
- steel comp 440c inner member
- 材料
- steel comp 410 race insert
- 材料
- steel internal rod end body
- 外側部材外径
- 1.7900 inches minimum and 1.8100 inches maximum
- 外側部材幅
- 0.6250 inches minimum and 0.6350 inches maximum
- シャンクねじ長さ
- 1.9900 inches minimum and 2.0300 inches maximum
- シャンクスタイル
- externally threaded
- 特集
- serial no. vibro etched on od of outer member,keyway in shank 0.125 in.min,0.130 in. max w,0.0845 in. min,0.0895 in. max dp
- スタイル指定子
- ball type
- テストデータドキュメント
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- スレッドクラス
- 3a
- ねじ径
- 0.562 inches nominal
- ねじ方向
- right-hand
- インチあたりのねじ山数
- 18
- ねじシリーズ指定子
- unf
関連ベアリング
この NSN に関連付けられているさまざまなベアリング モデルをご覧ください。以下のベアリングをクリックすると、詳細な技術データ、性能評価、およびアプリケーションガイドラインが表示されます。
| 部品番号 | 名前 |
|---|---|
| 204-076-428-005 | Rod End Plain Bearing |
| 204-076-428-5 | Rod End Plain Bearing |
| ADNE8-302W | Rod End Plain Bearing |
| ATNE8-302WDHS | Rod End Plain Bearing |
よくある質問
ベアリングに関するよくある質問への簡単な回答を見つけてください。 3120-01-030-3383. 技術仕様、インストールのヒント、メンテナンスのガイドライン、規制要件、トラブルシューティングのアドバイスを確認します。
- What is the FSCG of the NSN 3120-01-030-3383?
- The FSCG of the NSN 3120-01-030-3383 is 3120
- Does the NSN 3120-01-030-3383 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-030-3383 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-030-3383 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-01-030-3383 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-030-3383 was assigned to the Federal Catalog?
- It was assigned 49年前, on Wed, Nov 3, 1976