13826 Thrust Washer Bearing
包括的な仕様とアプリケーションの詳細: 13826 Thrust Washer Bearing.
まとめ
ベアリングの詳細な概要情報を確認します。 13826. 調達、コンプライアンス、正確な部品追跡をサポートするための NSN、分類グループ、識別コードが含まれています。
- 部品番号
- 13826
- 連邦供給分類
- 3120 非マウント滑り軸受
- (NSN) 国立ストック番号
- 3120-01-306-3577
- 商品名コード
- 13211
- 連邦物品識別ガイド
- A045A0
- 割り当て日
- 08/23/1989
通常、1 つの平面または球面と中央に配置された穴を持つ、任意の周囲形状のアイテムです。移動 (運動) 荷重がかかる用途向けに設計されています。ベアリング品質の合成樹脂 (プラスチック) または多層材料で作られたアイテムを除き、一方のベアリング面は、特定の表面仕上げ指定が 32 マイクロインチ (0.8 マイクロメートル) 以下、算術平均 (aa) (算術平均偏差) であるか、次のいずれかの条件を満たしている必要があります。ラッピングまたは研磨されている、目に見えるまたは検出可能な潤滑手段がある、溝、くぼみがある、または自己潤滑性がある。厚さは、周囲の平面間の最短距離の外径の 25 パーセントを超えてはなりません (厚さおよび/または外径が公差寸法として指定されている場合、最大寸法を使用して適合性が判断されます)。除外: 軸に平行なベアリング面のみを持つ直線状の管状 (フランジなし) アイテム。ワッシャー、フラット、スペーサー、スリーブも参照してください。
counterbored cross-sectional shape style, square all corners corner shape, 3.7400 inches minimum and 3.7600 inches maximum counterbore diameter, 0.0350 inches minimum and 0.0450 inches maximum counterbore depth, round center hole shape style
データシート
以下はベアリングの包括的な技術仕様です。 3120-01-306-3577 . 寸法、材質、許容差、性能特性などを調べます。
- センターホール形状スタイル
- round
- コーナーシェイプ
- square all corners
- 座ぐり深さ
- 0.0350 inches minimum and 0.0450 inches maximum
- 座ぐり径
- 3.7400 inches minimum and 3.7600 inches maximum
- 断面形状スタイル
- counterbored
- 直径
- 3.5230 inches minimum and 3.5370 inches maximum
- 外径
- 4.5200 inches minimum and 4.5350 inches maximum
- 全体の厚さ
- 0.0950 inches minimum and 0.1050 inches maximum
- 材料
- plastic polyamide (nylon) overall
- スタイル指定子
- round
- 表面状態
- ground
よくある質問
ベアリングに関するよくある質問への簡単な回答を見つけてください。 13826. 技術仕様、インストールのヒント、メンテナンスのガイドライン、規制要件、トラブルシューティングのアドバイスを確認します。
- What is the FSCG of the NSN 3120-01-306-3577?
- The FSCG of the NSN 3120-01-306-3577 is 3120
- Does the NSN 3120-01-306-3577 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105008
- Does NSN 3120-01-306-3577 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-306-3577 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-306-3577 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-306-3577 was assigned to the Federal Catalog?
- It was assigned 37年前, on Wed, Aug 23, 1989