3130-00-182-8629 Ball Bearing Unit
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3130-00-182-8629.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3130-00-182-8629. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-00-182-8629
- 품목 이름 코드
- 30556
- 연방 품목 식별 가이드
- A093A0
- 배정 날짜
- 11/09/1970
단일 또는 다중 행 볼 베어링을 통합한 하우징으로 구성된 조립된 장치로, 다양하거나 특정한 장착 조건을 충족하도록 설계되었습니다.
1.055 inches minimum and 1.057 inches maximum center to center distance between mounting holes along width, rigid alignment type, 0.2495 inches minimum and 0.2500 inches maximum bore diameter, 1.830 inches nominal height from bottom of base to bore centerline, fixed block type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-00-182-8629 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- rigid
- 블록 유형
- fixed
- 보어 직경
- 0.2495 inches minimum and 0.2500 inches maximum
- 폭을 따라 장착 구멍 사이의 중심 간 거리
- 1.055 inches minimum and 1.057 inches maximum
- 바닥에서 보어 중심선까지의 높이
- 1.830 inches nominal
- 하우징 높이
- 2.335 inches nominal
- 내부 장착 지정
- loose
- 부하 용량 유형
- radial
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 윤활재
- grease
- 전체 외경
- 2.075 inches nominal
- 재료 문서 및 분류
- 66 fed std all material responses ball
- 재료 문서 및 분류
- 66 fed std single material response inner race
- 재료 문서 및 분류
- 66 fed std single material response outer ring
- 재료 문서 및 분류
- ams 3652 assn std 1st material response or ams 3666 assn std 2nd material response seal
- 재료 문서 및 분류
- ams 5659 assn std single material response housing
- 재료
- steel corrosion resisting and plastic polytetrafluoroethylene or steel corrosion resisting and glass fiber and plastic polytetrafluoroethylene seal
- 재료
- steel comp e51100 or steel comp e52100 ball
- 재료
- steel comp e52100 inner race
- 재료
- steel comp e52100 outer ring
- 재료
- steel comp xm-12 housing
- 장착 구멍 유형
- round, threaded
- 공칭 나사 크기
- 0.250 inches
- 특별 기능
- 2nd mtg hole 15/16-24unf 3b
- 회전 요소 잠금 방법
- straight sleeve
- 물개 위치
- both ends
- 씰 유형
- contact
- 샤프트 끝 유형
- open
- 표면 처리 문서 및 분류
- qq-p-416,type 1,class 2 fed spec single treatment response inner race
- 표면 처리 문서 및 분류
- qq-p-416,type 1,class 2 fed spec single treatment response outer ring
- 표면 처리
- cadmium inner race
- 표면 처리
- cadmium outer ring
- 테스트 데이터 문서
- "97499-bps 4075 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unf
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 206-001-185-5 | Ball Bearing Unit |
| 206-001-188-001 | Ball Bearing Unit |
| 206-001-188-1 | Ball Bearing Unit |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3130-00-182-8629. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-00-182-8629?
- The FSCG of the NSN 3130-00-182-8629 is 3130
- Does the NSN 3130-00-182-8629 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-00-182-8629 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-00-182-8629 contain precious materials?
- Precious metal content is unknown
- Does NSN 3130-00-182-8629 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-00-182-8629 was assigned to the Federal Catalog?
- It was assigned 55년 전, on Mon, Nov 9, 1970