10110460 Bearing Housing Liner
포괄적인 명세 및 신청 세부사항: 10110460 Bearing Housing Liner.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 10110460. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 10110460
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-01-130-0798
- 품목 이름 코드
- 61786
- 연방 품목 식별 가이드
- A23900
- 배정 날짜
- 04/15/1982
베어링과 하우징 사이에 끼워지는 단단한 관형 품목으로, 주로 하우징 내벽 내부의 교체 가능한 마모 표면으로 설계되었습니다.
steel,qq-s-763,cl 321; 3.1850 in. min and 3.1950 in. max body id; 3.4574 in. min and 3.4577 in. max body od; 3.7140 in. min and 3.7240 in. max external flange od;0.0750 in. min and 0.0850 in. max external flange thickness;internal flange on opposite end of external flange; 3.0750 in. min and 3.0850 in. max internal flange id; 0.1020 in. nomminal internal flange thickness; 0.6200 in. min and 0.6400 in. max overall length; knurl starting 0.0600 in. max below external flange on body outside surface,0.0980 in. min and 0.1580 in. max in length; passivate,cp 14.10-03,99167,o/a; 250 microinches surface finish on left end surface of body and flange,and right end surface of left flange general characteristics item description, "99167-c+16.03 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)." test data document
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-130-0798 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 일반 특성 항목 설명
- steel,qq-s-763,cl 321; 3.1850 in. min and 3.1950 in. max body id; 3.4574 in. min and 3.4577 in. max body od; 3.7140 in. min and 3.7240 in. max external flange od;0.0750 in. min and 0.0850 in. max external flange thickness;internal flange on opposite end of external flange; 3.0750 in. min and 3.0850 in. max internal flange id; 0.1020 in. nomminal internal flange thickness; 0.6200 in. min and 0.6400 in. max overall length; knurl starting 0.0600 in. max below external flange on body outside surface,0.0980 in. min and 0.1580 in. max in length; passivate,cp 14.10-03,99167,o/a; 250 microinches surface finish on left end surface of body and flange,and right end surface of left flange
- 테스트 데이터 문서
- "99167-c+16.03 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 10110460. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-01-130-0798?
- The FSCG of the NSN 3130-01-130-0798 is 3130
- Does the NSN 3130-01-130-0798 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-01-130-0798 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-130-0798 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-130-0798 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-130-0798 was assigned to the Federal Catalog?
- It was assigned 44년 전, on Thu, Apr 15, 1982