GRFD1 15/16 Ball Bearing Unit
포괄적인 명세 및 신청 세부사항: GRFD1 15/16 Ball Bearing Unit.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. GRFD1 15/16. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- GRFD1 15/16
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-01-213-4375
- 품목 이름 코드
- 30556
- 연방 품목 식별 가이드
- A093A0
- 배정 날짜
- 07/26/1985
단일 또는 다중 행 볼 베어링을 통합한 하우징으로 구성된 조립된 장치로, 다양하거나 특정한 장착 조건을 충족하도록 설계되었습니다.
self-aligning alignment type, 2.469 inches nominal assembly overall length, 5.000 inches nominal bolt circle diameter, 1.9375 inches nominal bore diameter, fixed block type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-213-4375 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 조립 전체 길이
- 2.469 inches nominal
- 블록 유형
- fixed
- 볼트 원 직경
- 5.000 inches nominal
- 보어 직경
- 1.9375 inches nominal
- 칼라 위치
- one end
- 제공되는 기능
- ground rolling element groove
- 플랜지 두께
- 0.625 inches nominal
- 바닥에서 보어 중심선까지의 높이
- 3.063 inches nominal
- 하우징 직경
- 4.469 inches nominal
- 하우징 높이
- 5.298 inches nominal
- 하우징 길이
- 1.1250 inches nominal
- 내부 장착 지정
- standard
- 부하 용량 유형
- radial
- 윤활재
- grease
- 수평 중심선으로부터의 윤활 피팅 각도
- 30.0 degrees nominal
- 윤활 피팅 유형
- hydraulic
- 전체 외경
- 6.125 inches nominal
- 재료
- iron malleable housing
- 재료
- rubber synthetic and steel seal
- 재료
- steel bearing
- 재료
- steel collar
- 장착 구멍 유형
- square
- 장착 구멍 너비
- 0.526 inches minimum and 0.536 inches maximum
- 롤링 요소 홈 수량
- 2
- 회전 요소 잠금 방법
- eccentric cam locking collar
- 물개 위치
- both ends
- 씰 유형
- contact
- 샤프트 끝 유형
- open
- 스타일 지정자
- flange block
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. GRFD1 15/16. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-01-213-4375?
- The FSCG of the NSN 3130-01-213-4375 is 3130
- Does the NSN 3130-01-213-4375 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-01-213-4375 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-213-4375 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-213-4375 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-213-4375 was assigned to the Federal Catalog?
- It was assigned 41년 전, on Fri, Jul 26, 1985