LRP-12 Ball Bearing Unit
포괄적인 명세 및 신청 세부사항: LRP-12 Ball Bearing Unit.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. LRP-12. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- LRP-12
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-01-234-0430
- 품목 이름 코드
- 30556
- 연방 품목 식별 가이드
- A093A0
- 배정 날짜
- 06/06/1986
단일 또는 다중 행 볼 베어링을 통합한 하우징으로 구성된 조립된 장치로, 다양하거나 특정한 장착 조건을 충족하도록 설계되었습니다.
rigid alignment type, 1.156 inches nominal assembly overall length, 0.125 inches nominal base thickness, 1.250 inches nominal base length, fixed block type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-234-0430 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- rigid
- 조립 전체 길이
- 1.156 inches nominal
- 기본 길이
- 1.250 inches nominal
- 기본 두께
- 0.125 inches nominal
- 블록 유형
- fixed
- 보어 직경
- 0.7500 inches nominal
- 폭을 따라 장착 구멍 사이의 중심 간 거리
- 3.375 inches nominal
- 칼라 위치
- one end
- 인용된 문서에서의 이탈
- as modified by material
- 제공되는 기능
- ground rolling element groove
- 바닥에서 보어 중심선까지의 높이
- 1.125 inches nominal
- 하우징 높이
- 2.219 inches nominal
- 하우징 길이
- 0.844 inches nominal
- 하우징 폭
- 4.250 inches nominal
- 내부 장착 지정
- standard
- 부하 용량 유형
- radial
- 윤활재
- grease
- 윤활 피팅 유형
- self lubricated
- 재료
- rubber synthetic inner liner
- 재료
- rubber synthetic seal
- 재료
- steel bearing
- 재료
- steel housing
- 장착 슬롯 길이
- 0.438 inches nominal
- 장착 슬롯 너비
- 0.375 inches nominal
- 장착 구멍 유형
- slotted
- 롤링 요소 홈 수량
- 2
- 회전 요소 잠금 방법
- direct
- 물개 위치
- both ends
- 씰 유형
- labyrinth
- 샤프트 끝 유형
- closed
- 특별 테스트 기능
- special quality control testing
- 스타일 지정자
- pillow block, separable with innerliner
- 테스트 데이터 문서
- "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. LRP-12. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-01-234-0430?
- The FSCG of the NSN 3130-01-234-0430 is 3130
- Does the NSN 3130-01-234-0430 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-01-234-0430 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-234-0430 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-234-0430 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-234-0430 was assigned to the Federal Catalog?
- It was assigned 40년 전, on Fri, Jun 6, 1986