What is the FSCG of the NSN 3130-01-251-1742?

The FSCG of the NSN 3130-01-251-1742 is 3130

Does the NSN 3130-01-251-1742 have a Schedule B code assigned?

Yes, the Schedule B code is 8482991050

Does NSN 3130-01-251-1742 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3130-01-251-1742 contain precious materials?

Item does not contain precious metal.

Does NSN 3130-01-251-1742 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3130-01-251-1742 was assigned to the Federal Catalog?

It was assigned 38년 전, on Sat, Mar 14, 1987

132D1311-3 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 132D1311-3. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: 132D1311-3
연방 공급 분류: 3130 장착 베어링
(NSN) 국가 재고 번호: 3130-01-251-1742
품목 이름 코드: 21546
연방 품목 식별 가이드: A23900
배정 날짜: 03/14/1987

베이스에 부착되어 탈착식 베어링의 하우징을 형성하도록 설계된 부품. 베어링은 하우징의 필수 부품일 수 있습니다. 먼지 및/또는 이물질의 유입을 방지하고, 윤활제를 유지하며, 샤프트 등의 위치를 조정하는 데 사용됩니다.

material is steel,alloy;astm-a322,hot rolled or astm-a331,cold finished,4340 or 43l40;or steel,alloy;ams 6359,(4340 or 43l40),hot rolled or cold finished;finish is electroless nickel coatind per mil-std-171,0.0003 to 0.0005thick;shot peening prior to coating isnot required;heat treat to normalize and re-austenitize,quench and temper 1aw mil-h-6875 to 33-38 rc;part shall bemagnetic particle inspected per mil-i-6868,no cracks,seams or laps permitted;width of housing is 8.035 in. min. and 8.065 in. max general characteristics item description, gau-8/a 30mm weapon end item identification

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-251-1742 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

최종 품목 식별: gau-8/a 30mm weapon
일반 특성 항목 설명: material is steel,alloy;astm-a322,hot rolled or astm-a331,cold finished,4340 or 43l40;or steel,alloy;ams 6359,(4340 or 43l40),hot rolled or cold finished;finish is electroless nickel coatind per mil-std-171,0.0003 to 0.0005thick;shot peening prior to coating isnot required;heat treat to normalize and re-austenitize,quench and temper 1aw mil-h-6875 to 33-38 rc;part shall bemagnetic particle inspected per mil-i-6868,no cracks,seams or laps permitted;width of housing is 8.035 in. min. and 8.065 in. max

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 132D1311-3. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3130-01-251-1742?: The FSCG of the NSN 3130-01-251-1742 is 3130

Does the NSN 3130-01-251-1742 have a Schedule B code assigned?: Yes, the Schedule B code is 8482991050

Does NSN 3130-01-251-1742 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3130-01-251-1742 contain precious materials?: Item does not contain precious metal.

Does NSN 3130-01-251-1742 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.