3130-01-600-0428 Ball Bearing Unit
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3130-01-600-0428.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3130-01-600-0428. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3130 장착 베어링
- (NSN) 국가 재고 번호
- 3130-01-600-0428
- 품목 이름 코드
- 30556
- 연방 품목 식별 가이드
- A093A0
- 배정 날짜
- 11/03/2011
단일 또는 다중 행 볼 베어링을 통합한 하우징으로 구성된 조립된 장치로, 다양하거나 특정한 장착 조건을 충족하도록 설계되었습니다.
grease lubrication material, mil-c-g-23827 mil spec single material response lubrication material document and classification, 0.0 degrees nominal lubrication fitting angle from horizontal centerline, electronic warfare equipment, nonairborne end item identification, 18.850 inches minimum and 18.856 inches maximum bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3130-01-600-0428 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 최종 품목 식별
- electronic warfare equipment, nonairborne
- 보어 직경
- 18.850 inches minimum and 18.856 inches maximum
- 윤활 재료 문서 및 분류
- mil-c-g-23827 mil spec single material response
- 윤활재
- grease
- 수평 중심선으로부터의 윤활 피팅 각도
- 0.0 degrees nominal
- 윤활 피팅 유형
- flush
- 통제 기관에서 할당한 부품 이름
- bearing assy
- 재료 문서 및 분류
- aisi s2100 assn std single material response ball
- 재료 문서 및 분류
- avon spec number bes 2-1-054, aisi 1552 mfr ref single material response race
- 재료
- rubber synthetic seal
- 재료
- steel race
- 재료
- steel comp e52100 ball
- 특별 기능
- outside dia 26.125; contains 64 (.75 dia) balls; two 1/8-27 npt grease fittings are located 180 deg apart (receased below od) to intersect with the vertical 1/8-27 npt lube holes; hardness rating of races 24-32 rc, balls 63-66rc, raceway induction 58-63rc; has inv stub tooth form, pitch dia 19, diametral pitch 8, pressure anagle 20 deg, 152 teeth, hardness 24-32rc, circular tooth thickness 0.1963-0.1948; each race is 2.0 inc high, they don't align level, entire assembly is 2.50 high
- 표면 처리
- chromium race
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3130-01-600-0428. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3130-01-600-0428?
- The FSCG of the NSN 3130-01-600-0428 is 3130
- Does the NSN 3130-01-600-0428 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-01-600-0428 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-600-0428 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-600-0428 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-600-0428 was assigned to the Federal Catalog?
- It was assigned 14년 전, on Thu, Nov 3, 2011