- 내부 여유 공간
- 0.0006 inches minimum axial and 0.0018 inches maximum axial
- 위치 기능
- nonlocating
- 재료 문서 및 분류
- -4001,91547 mfr ref single material response outer ring
- 재료 문서 및 분류
- -4001,91547 mfr ref single material response roller
- 재료 문서 및 분류
- ams 4616 assn std single material response retainer
- 재료
- copper alloy retainer
- 재료
- steel outer ring
- 재료
- steel roller
- 귀중한 자료 및 위치
- retainer silver
- 귀중한 재료
- silver
- 리테이너 제작 방법
- machined
- 특별 기능
- outer ring raceway 6 uin aa,outer ring lips 16 uin aa,od surface of outer ring 10 uin aa,all surfaces of rollers 2 uin aa,heat stabilized for operation at m65 to p350 deg f,bearing specific dynamic load cap. 7270 lb,outer ring containers 6 slots on each face equally spaced so that the slots on 1 face are displaced by 30 deg from slots on the opposite face,0.050 in. min,0.055 in. max w,0.050 in. min,0.055 in. max deep,id retainer and lip of outer ring concentric within 0.0003 in.,od perpendicular w/outer ring faces within 0.00003 in. tir,retainer id and od concentric within 0.003 in. tir,center ring faces parallel within 0.0002 in.,roller bearing surface parallel within 0.000025 and perpendicular w/faces within 0.00005 in.
- 표준 허용 오차 지정
- rbec no.5
- 표면 마감
- ground
- 테스트 데이터 문서
- 91547-e1004 standard (includes industry or association standards, individual manufactureer standards, etc.). and 91547-a+4903aa standard (includes industry or association standards, individual manufactureer standards, etc.).
