3110-00-042-4532 Airframe Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-042-4532.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-042-4532. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-042-4532
- 품목 이름 코드
- 00041
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 01/13/1972
내륜 또는 외륜이 경화된 볼(ball) 열 위에서 회전하는 원통형 제품으로, 베어링은 궤도를 따라 굴러 마찰을 최소화합니다. 이러한 제품은 부식되지 않는 특성, 가벼운 무게, 미터법 대신 인치 단위의 치수, 일반적으로 외륜의 면 밖으로 돌출된 내륜, 또는 내경이 내경보다 약간 큰 매우 좁은 폭의 내륜을 특징으로 합니다. 주로 항공기 조립품(예: 제어 시스템 및 항공기 표면)에 사용하도록 설계되었습니다. 제외 대상: 베어링, 볼, 환형.
0.9950 inches nominal inner ring width, rigid alignment type, 0.0004 inches minimum radial and 0.0010 inches maximum radial internal clearance, 0.6250 inches nominal bore diameter, contact bearing seal type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-042-4532 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- rigid
- 베어링 씰 유형
- contact
- 보어 직경
- 0.6250 inches nominal
- 내부 링 너비
- 0.9950 inches nominal
- 내부 여유 공간
- 0.0004 inches minimum radial and 0.0010 inches maximum radial
- 하중 방향
- radial
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 외부 링 너비
- 0.9200 inches nominal
- 전체 외경
- 1.9375 inches nominal
- 재료 문서 및 분류
- 66 fed std all material responses ball
- 재료 문서 및 분류
- 66 fed std single material response inner ring
- 재료 문서 및 분류
- 66 fed std single material response outer ring
- 재료 문서 및 분류
- ams 3652 assn std 1st material response or ams 3666 assn std 2nd material response seal
- 재료
- plastic polytetrafluoroethylene or plastic polytetrafluoroethylene and glass fiber seal
- 재료
- steel comp e52100 or steel comp e51100 ball
- 재료
- steel comp e52100 inner ring
- 재료
- steel comp e52100 outer ring
- 특별 기능
- 80 pct. full of mil-g-81322,axial play 0.007 in.,heat treat rings and balls to rockwell c 60 to 66 and stabilized for operation at 250 deg f,radial and lateral eccentricity 0.0010 in. inner ring,0.0016 in. outer ring
- 씰 수량
- 2
- 표준 허용 오차 지정
- afbma std tolerance for airframe ball bearings
- 스타일 지정자
- double row
- 표면 처리 문서 및 분류
- qq-p-416,ty 1,cl 2 fed spec single treatment response exposed surfaces as mounted
- 표면 처리
- cadmium exposed surfaces as mounted
대체합니다
The NSN 3110-00-042-4532 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-00-142-4442 | No Name Available | 07/01/1982 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| AS27644 | Airframe Ball Bearing |
| DPP10 | Airframe Ball Bearing |
| DPP10FS464 | Airframe Ball Bearing |
| MS20207DPP10 | Airframe Ball Bearing |
| MS27644-10 | Airframe Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-042-4532. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-042-4532?
- The FSCG of the NSN 3110-00-042-4532 is 3110
- Does the NSN 3110-00-042-4532 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-00-042-4532 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-042-4532 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-042-4532 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-042-4532 was assigned to the Federal Catalog?
- It was assigned 54년 전, on Thu, Jan 13, 1972