ABR4M-113W Rod End Ball Bearing
포괄적인 명세 및 신청 세부사항: ABR4M-113W Rod End Ball Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. ABR4M-113W. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- ABR4M-113W
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-058-1663
- 품목 이름 코드
- 00049
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 06/13/1967
특수한 단일 또는 다중 열 볼 베어링으로, 단단하거나 자체 정렬이 가능하며, 단단한 섕크나 중공 섕크로 제작되고, 내부 또는 외부 나사산이 있습니다.
0.2500 inches nominal bore diameter, 0.5930 inches nominal inner ring width, self-aligning alignment type, contact bearing seal type, 1.8750 inches nominal length from bore center to shank end
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-058-1663 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2500 inches nominal
- 내부 링 너비
- 0.5930 inches nominal
- 보어 중심에서 섕크 끝까지의 길이
- 1.8750 inches nominal
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.4375 inches nominal
- 전체 길이
- 2.3440 inches nominal
- 전체 외경
- 0.9380 inches nominal
- 재료
- rubber synthetic seal
- 재료
- steel ball
- 재료
- steel inner ring
- 재료
- steel outer ring
- 재료
- steel shaft
- 공칭 나사 크기
- 0.375 inches
- 특별 기능
- 0.980 in. w 0.670 in. deep @keyway per nas 513,fill 40 to 50 pct with specified lubricant
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.3750 inches nominal
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 1.1250 inches nominal
- 스타일 지정자
- double row, staggered, ball
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. ABR4M-113W. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-058-1663?
- The FSCG of the NSN 3110-00-058-1663 is 3110
- Does the NSN 3110-00-058-1663 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-058-1663 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-058-1663 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-058-1663 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-058-1663 was assigned to the Federal Catalog?
- It was assigned 59년 전, on Tue, Jun 13, 1967