RAP4M6-3E9107A Rod End Ball Bearing
포괄적인 명세 및 신청 세부사항: RAP4M6-3E9107A Rod End Ball Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. RAP4M6-3E9107A. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- RAP4M6-3E9107A
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-058-1663
- 품목 이름 코드
- 00049
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 06/13/1967
특수한 단일 또는 다중 열 볼 베어링으로, 단단하거나 자체 정렬이 가능하며, 단단한 섕크나 중공 섕크로 제작되고, 내부 또는 외부 나사산이 있습니다.
0.2500 inches nominal bore diameter, self-aligning alignment type, 1.8750 inches nominal length from bore center to shank end, 0.5930 inches nominal inner ring width, contact bearing seal type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-058-1663 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2500 inches nominal
- 내부 링 너비
- 0.5930 inches nominal
- 보어 중심에서 섕크 끝까지의 길이
- 1.8750 inches nominal
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.4375 inches nominal
- 전체 길이
- 2.3440 inches nominal
- 전체 외경
- 0.9380 inches nominal
- 재료
- rubber synthetic seal
- 재료
- steel ball
- 재료
- steel inner ring
- 재료
- steel outer ring
- 재료
- steel shaft
- 공칭 나사 크기
- 0.375 inches
- 특별 기능
- 0.980 in. w 0.670 in. deep @keyway per nas 513,fill 40 to 50 pct with specified lubricant
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.3750 inches nominal
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 1.1250 inches nominal
- 스타일 지정자
- double row, staggered, ball
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. RAP4M6-3E9107A. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-058-1663?
- The FSCG of the NSN 3110-00-058-1663 is 3110
- Does the NSN 3110-00-058-1663 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-058-1663 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-058-1663 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-058-1663 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-058-1663 was assigned to the Federal Catalog?
- It was assigned 59년 전, on Tue, Jun 13, 1967