What is the FSCG of the NSN 3110-00-077-2118?

The FSCG of the NSN 3110-00-077-2118 is 3110

Does the NSN 3110-00-077-2118 have a Schedule B code assigned?

Yes, the Schedule B code is 8482400000

Does NSN 3110-00-077-2118 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-077-2118 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-077-2118 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-077-2118 was assigned to the Federal Catalog?

It was assigned 62년 전, on Tue, Jan 1, 1963

3110-00-077-2118 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-077-2118. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-077-2118
품목 이름 코드: 00040
연방 품목 식별 가이드: A044A0
배정 날짜: 01/01/1963

캠과 롤링 접촉을 하고 왕복 또는 진동 운동을 선형 운동으로 변환하는 데 사용되는 롤러와 스터드로 구성된 조립체입니다.

1.1718 inches nominal overall length, 0.2760 inches minimum and 0.2810 inches maximum outer ring width, mil-g-23827 mil spec single material response lubrication material document and classification, grease lubrication material, 0.5010 inches maximum overall outside diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-077-2118 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

윤활 재료 문서 및 분류: mil-g-23827 mil spec single material response
윤활재: grease
외부 링 너비: 0.2760 inches minimum and 0.2810 inches maximum
전체 길이: 1.1718 inches nominal
전체 외경: 0.5010 inches maximum
재료: steel overall
공칭 나사 크기: 0.190 inches
특별 기능: 0.070 in dia cotter pin hole in shank 0.156 in from end
스터드 직경: 0.1890 inches minimum and 0.1900 inches maximum
스터드 길이: 0.8280 inches minimum and 0.8750 inches maximum
스타일 지정자: cam follower
표면 처리: cadmium exposed surfaces as mounted
표면 처리: chromium outer ring outside diameter
표면 처리: chromium side plate
스레드 클래스: 3a
나사 방향: right-hand
나사산 길이: 0.3440 inches nominal
인치당 실 수량: 32
나사 시리즈 지정자: unf

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-077-2118. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-077-2118?: The FSCG of the NSN 3110-00-077-2118 is 3110

Does the NSN 3110-00-077-2118 have a Schedule B code assigned?: Yes, the Schedule B code is 8482400000

Does NSN 3110-00-077-2118 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-077-2118 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-077-2118 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.