What is the FSCG of the NSN 3110-00-179-7349?

The FSCG of the NSN 3110-00-179-7349 is 3110

Does the NSN 3110-00-179-7349 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-179-7349 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7349 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-179-7349 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-179-7349 was assigned to the Federal Catalog?

It was assigned 56년 전, on Mon, Mar 17, 1969

TJ74890-9D11 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. TJ74890-9D11. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: TJ74890-9D11
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-179-7349
품목 이름 코드: 00015
연방 품목 식별 가이드: A044A0
배정 날짜: 03/17/1969

경화된 원통형 롤러가 한 줄 또는 여러 줄로 배열된 비조정식 롤러 베어링과 내부 또는 외부 링과 함께 또는 별도로 사용되는 리테이너로 구성됩니다. 베어링, 롤러, 기체는 제외됩니다.

5.2792 inches minimum and 5.2800 inches maximum overall outside diameter, 2.0750 inches minimum and 2.0800 inches maximum overall width, 0.0021 inches minimum radial and 0.0033 inches maximum radial internal clearance, 4.5015 inches minimum and 4.5031 inches maximum bore diameter, nonlocating locating feature

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-179-7349 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 4.5015 inches minimum and 4.5031 inches maximum
내부 여유 공간: 0.0021 inches minimum radial and 0.0033 inches maximum radial
위치 기능: nonlocating
전체 외경: 5.2792 inches minimum and 5.2800 inches maximum
전체 너비: 2.0750 inches minimum and 2.0800 inches maximum
재료 문서 및 분류: ams 6490 assn std single material response or 114rs213-3 mfr ref single material response outer ring
재료 문서 및 분류: ams 6490 assn std single material response or 114rs213-3 mfr ref single material response roller
재료 문서 및 분류: fed-std-66 fed std single material response or 114rs213-3 mfr ref single material response retainer
재료: steel outer ring
재료: steel retainer
재료: steel roller
리테이너 제작 방법: machined
특별 기능: max dia variation per roller 0.00005 in.,surface finish od of outerring and ring land riding 63 uin aa,raceways 10 uin aa,roller 4 uin aa,faces 125 uin aa,8 holes equally spaced 0.115 in. min to 0.135 in. max dia
표면 마감: ground
테스트 데이터 문서: "51588-qcv1ps-2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 51588-qcv1pas-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 60380-tps20a5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 60380-tps20a0 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. TJ74890-9D11. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-179-7349?: The FSCG of the NSN 3110-00-179-7349 is 3110

Does the NSN 3110-00-179-7349 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-179-7349 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7349 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-179-7349 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.